How to load staples? - Arrow T50P ARROW STAPLE GUN

The most common cause of the gun not firing is loading it with the wrong staples. Look at the packaging for the staples and see if it lists the gun. Staples are NOT universal and are make for specific staple guns.

It "sounds like" it is jammed. You may have to pull out the staple with needle nosed pliers. e`1

How to Load Staple Gun

How to Troubleshoot Staple Gun Hunker

Staples newly purchased will always be attached when purchased and that answers your question...wherever the device u are loading has a horizontal channel, there will be a loading window at the end. Take it apart by realeasing the cap or spring at the bottom and sliding the train of staples into the channel inside. Replace cap or spring lever to original position and secure. Stapler is now loaded.

Angelbabie...Like most things, it's pretty easy if you know how.

1.Release the loading latch located on the back end of the staple gun by pinching it with your thumb in a downward motion. This will release the catch and allow you to pull the loading slide out.

2.Hold the gun upside down (so the staple don't fall out) and place a stick of staples in the bottom of the channel which will be exposed once you pull back the loading slide.

3.Push the slide back in and make sure the latch is engaged. All good to go!

Happy stapling.

Try loading with fewer staples to see if that helps and make sure there are no loose staples jamming the mechanism.

there should be a button / lever at the rear press it and it should open so as to insert the staples

Push in and down the silver color piece at the end of the gun. Pull piece and spring out. Load staples, end down. Reassemble.

Fire the stapler with the load chamber open and down, see if anything falls out. Point it in different positions and fire it, just make sure it cannot fire anything at you.

pull out the spring at the end of the gun. turn the staple gun upside down. Lay the staples in the track pointed side up, push in the spring slide so that it locks. You are ready to staple.

Open the chamber and drop the staples upright in to the chamber do not try to load the staples by placing them on the strip that pulls out as you do with most staple guns.