DeLonghi Stiromeglio Compact PRO 300 Iron Logo

Related Topics:

Posted on Jun 26, 2011

The steam from the boiler does not come through to the iron

5 Related Answers

Anonymous

  • 65 Answers
  • Posted on Jun 19, 2008

SOURCE: Instructions for use DiLonghi StiroMeglio compact iron (steam boiler Iron)

Is a long story but i make short.Don`t be afraid to leave your iron on.Is common to water tank iron to get working in more then 5-10 minutes.That machine are really safe since they do have more then 1 thermostat to control the water pressure.
How they work is pretty easy.The boil the water to a certan temperature and you know after certan F. the water become steam generatin pressure and steam.The thermostat control the heater and the electroswitch release the steam

If your in not making any steam after 5-10 minutes make sure you hear the electroswitch working.Sometimes they get cloght and even if the boil is under the pressure you can not get any steam at all
Good Luck

Ad

Anonymous

  • 1 Answer
  • Posted on Aug 29, 2008

SOURCE: Tefal Pro Express Steam Generator Iron

My Tefal is the same, steams for a while then nothing. I have tried to descale with no joy. I think it may be a problem with an internal thermostat that cuts out stopping the steam.

Any ideas????

Anonymous

  • 1 Answer
  • Posted on Aug 09, 2009

SOURCE: steam button on iron has stopped working

this just happened to us & the electronics man at my husband's plant took it apart & said the thermostat needs replaced. the wires were all eaten up so to speak

Anonymous

  • 43501 Answers
  • Posted on Jul 14, 2010

SOURCE: the boiler part is working fine but i have no

Hi,

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

meebers

  • 23 Answers
  • Posted on Jul 19, 2010

SOURCE: Will not send steam to the iron. Cleaned boiler

Assuming the iron is hot???, move the variable steam control from min to max several times to clear possible blockage. Sounds like the steam valve is clogged.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Rowenta dg5030 is not producing steam. The iron plate gets hot and the boiler is hot. Just when you depress the steam button, nothing comes out. There is steam in the boiler. Thank you

The small transfer water-line to the steamer section has closed up. This is due to contamination of salts, accumulated calcium or other debris. Its baked on and not easy to remove. All I can tell you is: always use filtered water or distilled water in the NEW IRON that will replace this one.
0helpful
1answer

My Rowenta pro precision iron steam station gets hot but doesn't steam. How do I get the iron to produce steam?

There are two cause. One the boiler resistance doesn´t turn of because of snap disc or bimetal thermostat fault or because a coil in the working valve (security valve). But if you can heard a click of opening movement of valve when you push the button it is able to be a thermostat.
0helpful
1answer

The iron has been all descaled, however we cannot get any steam when pressing the button. It is a Tefal express generator model 3 years old.

Once you have descaled the boiler and refilled your frontpiece of the iron itself (hopefully with distilled water - any supermarket) you press the "reset"/ "restart" button on the back end of the steam generating unit. When the water is hot enough press steam button & turbo button a few times - WARNING: make sure iron is facing downwards and cover ironing board with old rag because initially brown steam splatter will come out on first few steam releases.
Feb 14, 2015 • Tefal Irons
2helpful
1answer

Power steam elite boiler screw is stuck

Morphy Richards Power Steam Elite boiler screw
0helpful
1answer

Wet steam coming out of iron

You have to take part the iron by unscrewing the three bolts on the side handle with a small phillips driver. Then loose the allen screw on one side of the black thermostat wheel to unloosen it. Then take out the two bolt plastic protectors under the handle and unscrew the two allen bolts, carefully separate the top from the botton of the iron, carefully not to pry loose the cables from the top to the hot shoe.
On the back you will see a small white square box, that is the thermostat, which has a button on top, all you need to do is to push it in. This will make the iron heat up unless you have a thermostat failure (Black wheel with temperature indicators), which you will need to order the part and change it.
1helpful
1answer

Steam boiler iron

you can download instr. manual from www. fitness.manualsonline.com or www.retrevo.com or www.manualsfactory.com

service manual go www.pdfservicemanual.com
God bless you. However see the diagram is universal for repair small appliances.

7_26_2012_12_37_09_pm.jpg
Jul 25, 2012 • Irons
0helpful
1answer

Will not send steam to the iron. Cleaned boiler cleaned reservoir. Help!! i love this iron.

Assuming the iron is hot???, move the variable steam control from min to max several times to clear possible blockage. Sounds like the steam valve is clogged.
0helpful
1answer

Sole plate leaking

This IS a steam iron? The iron must be hot for the steam to form. If it's not hot enough, the water is leaking thru the steam holes. Also if the channels are calsified (boiler stone has formed into the steam channels) this may happen.
Nov 04, 2009 • Tefal Irons
0helpful
2answers

Instructions for use DiLonghi StiroMeglio compact iron (steam boiler Iron)

Is a long story but i make short.Don`t be afraid to leave your iron on.Is common to water tank iron to get working in more then 5-10 minutes.That machine are really safe since they do have more then 1 thermostat to control the water pressure.
How they work is pretty easy.The boil the water to a certan temperature and you know after certan F. the water become steam generatin pressure and steam.The thermostat control the heater and the electroswitch release the steam

If your in not making any steam after 5-10 minutes make sure you hear the electroswitch working.Sometimes they get cloght and even if the boil is under the pressure you can not get any steam at all
Good Luck
Jun 10, 2008 • Irons
3helpful
2answers

Tefal Pro Express Steam Generator doesn't.

OK... so I have fixed my problem of NO STEAM, just lots of water coming out of the iron press plate itself... I had already cleaned the boiler, so I tried adding 1/4 tsp - 1/2 tsp bicarbonate soda to the water and flushing it through. From what came out of the iron press plate, I would say the problem was caused by a build up of goop (technical term) inside the iron. Once cleared, the iron is steaming away again. Please note, u will need to have an old towel handy if this is ur problem, 'cos until it starts getting better, there is a fair amount of water coming out of the iron press plate. Just add the bicarb to the water reserve and use the steam buttons to bring the bicarb through. Do not attempt to iron clothing with the bicarb in the water!!! Carolyn ;)
Not finding what you are looking for?

107 views

Ask a Question

Usually answered in minutes!

Top DeLonghi Irons Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a DeLonghi Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...