FLM-323B 3200 Where can I find the power supply board for this TV?

Tv have any LED power light indication at all or power LED is flashing?Yes,the power supply board is dead,that the board where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

try finding a service center that repairs those sets. Or try ebay. Lots of TV parts there.

There are two places to look for the problems, the backlight inverter board and the power supply. Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc. Check to see if you get any DC voltage on the output connectors.
http://en.wikipedia.org/wiki/Capacitor_plague
Please post back what you find.
You can look for parts here: www.shopjimmy.com

Do you have any power supply boards left for a TDA03211C?

have you pluged it in proply

check the fuse

Check and replace ALL high value electrolytic capacitors on the power supply board. The Polaroids have known issues with leaky caps in the power supply. It's best to just change them all to prevent future failures.

The newer technology has design issues due to the confined space where all the components are and not well ventilated. A good number of LCDs failed due to overheated components, specially in the power supply circuitry; once this parts become dry or leaking the LCD will fail to power up.
It seems like the power supply is defective on your LCD. Replacing or repairing it should fix your power up problems.

Let me know if you need further assistance.

Read your email.

Polaroid FLM-323b No power,No led light, checked the fused and the fuse is good?
Can't find any bad Caps? Well I spent some time, well alot of time trying to figure out what's wrong and finally did.
The problem is a diode on the power board location Z9 Part # ( P6KE350A )On some boards it's the diode and the capacitor right next to it part # ( R 331K 1KV )
If this works Please donate Paypal [email protected] anything helps Ive spent well over a weeks time and count less hours trying to figure out what was wrong.I have included some pics to try and help.
Thanks Z28r2fast4u