Would like to change rings from 3 to 7 rings - Uniden Lands Phones

it might ring more than 3 times but you dont hear the first few if you are on Increasing Ring Volume. change volume to fixed volume ring.

See the "Changing the ring setting of the telephone answering machine" section on page 60 of this manual.

The CS6119 isn't an answering machine. It will continue to ring until someone or something picks up or the caller hangs up.

If you have an answering machine connected, please refer to its documentation or else repost your question and specify the make and model of the answering machine.

The CS6119 isn't an answering machine. It will continue to ring until someone or something picks up or the caller hangs up.

If you have an answering machine connected, please refer to its documentation or else repost your question and specify the make and model of the answering machine.

To change the number of rings enter Feature 983, if your system has 2 digit intercom #s your password is 120000 if your system has 3 digit intercom #s your password is 1020000. once you have entered the password you will see 3 selections you can make .use the three soft keys under the display and select AA (auto Attendant).
The 3 soft key selections GRTG, TABLE, and LINES
Press the LINES soft key
Enter the line number on the line you want to change ringing on and press OK
Press the TABLE soft key then the RINGS soft key
Press the CHNG soft key and enter in the amount of rings you wantand press OK
Press the NEXT key to go to the next line
Repeat the procedure for the remaining lines
Press Rls when finished

To change the number of rings enter Feature 983, if your system has 2 digit intercom #s your password is 120000 if your system has 3 digit intercom #s your password is 1020000. once you have entered the password you will see 3 selections you can make .use the three soft keys under the display and select AA (auto Attendant).
The 3 soft key selections GRTG, TABLE, and LINES
Press the LINES soft key
Enter the line number on the line you want to change ringing on (probably Line 1) and press OK
Press the TABLE soft key then the RINGS soft key
Press the CHNG soft key and enter in the amount of rings you wantand press OK
Press the NEXT key to go to the next line
Repeat the procedure for the remaining lines
Press Rls when finished

Feature * 6 is for the ring tone of the set, it doesn't change the cadence (ring tone) on a line...

The only way to change the ring tone on a line... it would require everyone that has that number to change.

You need to go into the programming
-> look for LINE and enter
-> put in 003 for line 3 and enter
-> under TRUNK/LINE DATA find DISTINCT RING and change
-> REL to end programming...

Now that line 3 will ring differently. But it will ring differently on everyone's sets that has line 3 on their phone

You may need to change your Ring Volume. Here are some instructions on how to do so.

To Change your Ring Type:
1. Press the Feature button, then * 6
2. Press the number keys 1 – 4 to hear the different ring types
3. Press the OK softkey when you hear your desired ring
To Change the Ring Volume:
1. Press the Feature button, then * 80
2. Press the volume key up or down
3. Press the release key1 to exit and save the volume level

Let me know if this works for you.

Not sure how to change the number of time it rings but to change your voice message call yourself, put in your pass when it tells you to then press 4. Now press 3. Now press 1. To have a standard greeting with your number press 1, to have one with your name press 2, and to make your own press 3. Hope this helped.

You will have to get into the programming mode and change Memory Block 4-01 for the port of each phone you want to ring. The corresponding light for the button is OFF for no ring, GREEN for ringing, and RED for delayed ringing.