Hauppauge WinTV-HVR-950Q  TV Input Logo

Related Topics:

Posted on Dec 20, 2017

Black screen and when I use the windows media, I get the scratchy sound like its trying to connect but it can't? Trying to use the wintv 7 latest download but it gives me a black screen with no sound at all. tried changing the rate but still not working? Any guesses, using windows 7 on a MSI A6000 lap top.

1 Related Answer

rulds2008

Grand Canyon Tech

  • 3867 Answers
  • Posted on Nov 07, 2009

SOURCE: xp media center says no ntsc tuner installed

Okay, Media center does not work with some Wintv HVR's yet it will work with the software it came with and sometimes media center will use the wintv software to make it work but its sketchy. If you want a more media center compatiable card look at www.microsoft.com website they have a list of media center compatable Tv tuner cards, Trust me I am having the same problem with my tuner card now and its not wintv its a RCA and its under windows 7 this is just the thing here not all card work with media center.

Thanks for using fixya.com please do click the accept button.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have wintv-hvr-1950 hauppage box which suddenly stopped showing light. all things are connected as always - computer/internet working fine -Windows 7 - WinTVV7 screen opens black on my monitor

Make sure the power supply is working. Quite often you get a pretty crappy power supply with USB devices, so that is what I would suspect. Its a 5 Volt supply, and should get a little warm if its working. I don\'t think this device will work without a power supply.

Those supplies are quite standard, so bring your old one to Fry\'s, MicroCenter, Radio Shack, Best Buy, or even Walmart or the other stores to compare Volts, Amps, and polarity/size of the plug to make sure you get one that will work.
0helpful
2answers

No sound in Hauppauge WinTV radio under Windows 7 64 bit

Driver issue? I would go to the manufacturers website to check for compatible software...
1helpful
2answers

I am having a problem installing a Haupauge WinTV-HVR-3300 HD card. I am trying to install this in a new build HTPC with a fresh installation of Win7 64 bit on a new HDD. But after the drivers install...

Hi there,
what software are you using to watch live TV from the computer?
please make sure that the cable to get tv signal is connected properly.
Try using Windows Media Center and check if it will work.
Hope this helps!
0helpful
1answer

Bad quality sound reproduction.

I would start by trying to replace the sound card driver - link.

If that doesn't work, it may be an issue with the speakers themselves.
0helpful
1answer

Xp media center says no ntsc tuner installed

Okay, Media center does not work with some Wintv HVR's yet it will work with the software it came with and sometimes media center will use the wintv software to make it work but its sketchy. If you want a more media center compatiable card look at www.microsoft.com website they have a list of media center compatable Tv tuner cards, Trust me I am having the same problem with my tuner card now and its not wintv its a RCA and its under windows 7 this is just the thing here not all card work with media center.

Thanks for using fixya.com please do click the accept button.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

0helpful
1answer

Windows media center can not find ir receiver

be sure you have installed the driver. If you are using windows 7 you still need to install the winTV driver. I know this because I had the same problem. It should work then. Just go to TV setting in the media center setup and it should scan for channels.
0helpful
1answer

Hauppauge WinTV HVR-1600 - ATSC HDTV receiver

I have a Hauppauge WinTV HVR-1600. I have a comcast digital box hooked up to my PC. Signal is bad and black and white media. I installed the "current" driver two weeks ago (mid October) Work great! We had to perform a PC recovery. I downloaded the "current" driver. Got weak signal and black and white only.
1helpful
1answer

Colour

change the software to sage tv or beyond tv or if you are using windows vista try the media center
Not finding what you are looking for?

112 views

Ask a Question

Usually answered in minutes!

Top Hauppauge Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Hauppauge Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...