KLH KL2400 Tuner Logo

Related Topics:

Posted on Aug 22, 2008
Answered

Volume out of speakers nill

I just picked up a used kl-2400, and after hooking it up to some speakers, it produces virtually no sound. It seems almost like theres a setting where the volume was lowered within the menu, but I cant figure anything out.

Answer This Question
  • Anonymous Nov 01, 2008

    When hooked up to speakers there is no sound. I have tested the speakers with another stereo and they work. U plug in headphones and they work. But I can not get sound through the speakers.

  • Anonymous Nov 30, 2008

    I get sound from the left side, but none from the right. I have tried different speakers and different connections (banana plugs or a straight wire connection).

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 1 Answer
  • Posted on Feb 04, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

Joined: May 18, 2008
Answers
1
Questions
1
Helped
358
Points
3

I bought two of these in "non working" condidition. All it was is this: There are two plug-in's or shunt's whatever you wanna call them that come pre-installed on my units that were up/down and should have been horizontal in block marked "speaker output".
Both unit's work fine now. Came from factory that way!
Try it and let me know at [email protected]
Someone

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How can I reset this receiver?
Unplug your headphones
Read full answer
Jun 10, 2015 • KLH Kl-2400 Receiver
0helpful
1answer

Speaker produces noice/static/buzzing sound when it is off
That means that if too much power is going to the speaker or extraneous signals are being picked up by the wiring, it can come through the speakers as static. Stopping static requires finding and eliminating that extra electricity from transmitting through your speakers.
If you're still hearing distortion, turn down the volume on your amplifier until the distortion goes away. If the volume is too low to be easily heard, the problem may be that your amplifier produces too much power for your speakers to handle or that your amp and speakers have different impedance ratings.
Read full answer
Apr 04, 2017 • Boston Acoustics Duo-i Horizon Clock Radio
0helpful
1answer

How can i hook up surround sound without an actual sound system?
You can draw up a chart to show where the speakers would go.
Use some imagination and go into detail .
When watching a movie on the virtual surround system , pretend to adjust the volume of each of the 5.1 ( or is your system a premium 7.1?) channels to suite your audio needs.

Use small cardboard boxes and draw speakers on them... some of Moms thread , or some old kite string will do for wires too!
Be carefull not to cross the wires (string) or you may cause a short in the system and blow out your nice new system!
Read full answer
Sep 28, 2011 • Audio Players & Recorders
0helpful
1answer

I have my laptop hooked up to the z506 surround sound speaker system. Since I don't have a good sound card or multiple ports to support 5.1 surround sound, the rear speakers do produce a bit of a...
Check that your mic settings in the Volume control is not maxed out. Turn the mic off and see if the fuzziness clears up.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Read full answer
Jul 17, 2011 • Logitech Z506
0helpful
1answer

The volume knob from my right computer part Rev A00 broke off. Computer model Dell dimension 2400. Can I get a replacement knob and where?
Sounds like you broke the volume control knob for your speakers (Likely A215s)
Best bet, new pair of speakers as they don't sell replacement parts for the speakers themselves
Read full answer
Apr 24, 2010 • Dell Dimension 2400 PC Desktop
7helpful
1answer

My Dell AS501 does not produces sound. I have
make sure the power is hooked to the back of the monitor, and that the speakers are hooked into it. make sure it is switched on and volume is at 50% or higher. if it still doesnt work, try hooking an mp3 player to the speaker jack. if they work, its the computer. if it doesnt work, replace the speakers.
Read full answer
Dec 12, 2009 • Dell AS500 Sound Bar Computer Speakers
0helpful
1answer

Speaker produces sound even when the zone is off
Since the Pyle speaker is a 4 ohm device, it's likely that when you have other zones on, the change in the impedance will affect the volume. Check to see what impedance your other speakers are (standard is usually 8 ohm), and if your tuner has impedance matching for your zones. If it does not, that's most likely your issue. You could get an impedance matching transformer at Radio Shack to resolve this issue. Please rate my solution, thanks.
Read full answer
Apr 17, 2009 • Pyle PWRC82 Main / Stereo Speaker
0helpful
1answer

BA735nalog
most probably a connection problem
Read full answer
Dec 18, 2008 • Boston Acoustics BA735 Computer Speakers
0helpful
1answer

I've hooked up my LG 47" 1080p widescreen to a LG HE903PAW audio receiver / 5 disc dvd player with upscaling capabilities. I have tested the speaker system and everything's connected properly....
I was talking with LG on virtually the same problem. I have a samsung blu-ray player hooked up via HDMI. Even though the blu-ray is outputting 5.1, 6.1 or 7.1, the LG is only outputting 2 channel unless you switch to pro logic. LG states that this is a known problem and that you are to return the system to where you bought it for a replacement. Call the 1-800 number and they should give you the same answer.
Read full answer
Nov 23, 2008 • Audio Players & Recorders
0helpful
1answer

Rear speakers no sound
you have to have it set to one of the sound settings to get surround sound , and if what you have hooked up does not have a digital connection ( optical or coax) you can not get dolby digital surround either
if it is the stereo your listening to then set a sound to get virtual surround sound ( unless you have a digital tuner that supports digital signal input
Read full answer
Oct 26, 2008 • Audio Players & Recorders
Not finding what you are looking for?

View Most Popular

KL2400 Tuner

  • Audio Players & Recorders

Related Question

How can I reset this receiver?

  • KLH Kl-2400 Receiver

Related Topics

368 views

Ask a Question

Usually answered in minutes!

Popular Questions

KLH ASW10-120B subwoofer

KLH ASW10-120 Subwoofer

Loud humming buzzing sound coming from subwoofer

KLH HTA-4906 System

Hum no audio output

KLH ASW10-120 Subwoofer

Info

KLH ASW10-120 Subwoofer

Is there an online installation manual for the KLH

KLH ASW10-120 Subwoofer

Latest Celebrity Headphones Report
Latest Celebrity Headphones Report

View all Fixya Reports

Top KLH Audio Players & Recorders Experts

Grubhead
Grubhead

Level 3 Expert

5755 Answers

John
John

Level 2 Expert

510 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a KLH Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...