Unable to download and install software - Kodak C195 Digital Camera

Just follow the instructions and do it there will be no problem at all.First download and install Pheonix from this link. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link 5130 flash file and install it to C / program files/pheonix.. after finished this installation open pheonix . Inside the interface at the> top left <there you see "File" click there and choose "open file" and then select the approprait Product type i.e "which is written on the back panel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there, when you click there you'll see three sub-menus, just select the "Firmware Update" again you'll see another interface. Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Button and choose the code which is written in the back side of your phone. e.g CODE:0000000.if the same code does not found just take one which is higher. After this you can see "Dead phone USB flashing" click that box. Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead, unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" button after this, a message will prompt you "press power botton" etc. insert charger or press it and wait until the phone will Restart automatically in normal mode 10-15 minutes. If you cannot understand just leave a Comment / Click here1. thanks for visiting fixya. Good luck

Hi Sachin,
You might be using a 32 bit version on a 64 Bit version or vice versa.
Please download the correct version of the antivirus program.

Rgds,
Prashanth.

You can download "Drivers & Software" for Win7 (32bit & 64Bit) @ http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp600#DriversAndSoftware

Select your OS ie Win7(32bit) or Win7(64bit).

Disconnect the printer from the PC, and delete the printer you have installed & remove all the software previously installed on the PC. Reinstall the download "Drivers & Software".

Hope it helps.

Hope it helps.

Hello,

Go to this site:

HP PSC1610 Support

Click on the Software & Driver Downloads link.

Enter your operating system on the next page. Click Next.

Under Driver you can download basic or full featured drivers.

My best advice: Download the software to your desktop. (DO NOT RUN from the site.)

Power up the printer but do not connext the cable to the computer.

Run (double-click) the file you downloaded. Connect the printer when prompted.

The link above should be bookmarked. There is a lot of information available. You might want to download the manual and check it out.

Thanks for using Fixya.

Try reinstalling without unchecking the other software installations. Some bundles do not allow you to install some of the software as per their various agreements. You can simply uninstall the other software afterward. Be forewarned though, you may lose the functionality of the software you want to keep if they have it linked in some fashion.

Thanks for using FixYa.

go to web downloads.com in search place type the software name then u can easily downloads the software...

Go here to download the driver.


http://www.logitech.com/index.cfm/435/263&cl=us,en?WT.ac=sc|downloads||dd

Good Luck and Pleaase Rate FixYa!

Hi

You can download the software as per the operating system, click Download link.

Windows XP - Download

Windows Vista - Download

Windows 2000 - Download

Click on the the Download only button in the webpage and save the file , then run it to install the software for C6180

Thanks
Riz

Having problems installing my z600 printer on my hp laptop.

go to tools folder then application manger > options>settings> delete default web addess and turn off online certificate check of he software and try