We have a Zipspin duplicator 5 tower. I do not have the manual and are wanting to use. This is for our church and we have gone through changes that left us with any instructions of how to set up or to use. Are trying to copy a Spiritual Warfare series that is being recorded in our sound booth but needing to make copies for members.

After you put the different tracks on the one disk, you have to close (finalize) the disk. Go to this link:
http://windows.microsoft.com/en-US/windows-vista/Close-or-finalize-a-CD-or-DVD

you can contact the company and say that it is not as advertised or doesn't work
They are the only ones that can authorize a return and refund

download it from hp.com - support and driver page.

http://www.brothersoft.com/downloads/computer-manuals.html
you will have to type in the motherboard in the top search tab

or

http://help-site.com/c.m/

hope this helps

From Google .. Download Tower CD&DVD Duplicator 8 Bays Manual.. But You May Have to ente the Brand and Model good luck

your device comes from PDEtechnologies so you can go here to get the manual:
http://www.pdetechnology.com/cd.htm or http://www.pdetechnology.com/spec.htm
if there was a model on you posting it would be easier to find it but you have that information so it should not be that hard, the 2nd link takes you to the PDF's site where you can get all the manuals.

if it works for you don't forget to rate me and leave a comment

thx

We have the same problem with our CD duplicator at our church. When the duplicator finishes it always shows 'fail' but the copied CD-R appear to have copied correctly and play on other players.

check the amount of free space you have on your computer,if it too low this might be the cause of the problem, plus you might want to run defrag command

accutower won't burn cd it says "no clear cd'

it's not the heads that actually have the problem, it's the head guide that's sticking whenever it reaches those tracks mentioned. you need to open the drive initially to be able to repair or clean the malfunctioning parts. the read-write lenses be cleaned with cotton buds, and the stainless steil head guides be wiped clean and oiled.