Some how my boss has enabled the headset feature and I need to turn it off. I have looked at the manual over and over and can't find the solution. Can you help me?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Answer : Turn on the mobile phone and place within 10 ft of the headset.
With the headset turned off, press and hold the Talk button for about 7 seconds. You will hear a "pair" tone and the LEDs will flash continually to indicate the headset has entered into pairing mode.
Release the Talk button. The headset is now is "pairing" mode.
Initiate the device discovery feature (Bluetooth discovery) on the mobile phone. Refer to your mobile phone manual for further instructions.
When prompted by the phone, enter the headset passkey (0000). When pairing is complete the LEDs on headset will flash at 3 second intervals and the headset will be placed in standby mode, ready to make and receive calls.
Note: On some mobile phones you will need to activate the Bluetooth feature first and then search for the Bluetooth device. Please contact your cell phone manufacturer or the User's Manual for further information on how to pair pair Bluetooth devices.
Click to view the instruction manual for: 86707
1
Turn on the Bluetooth-enabled
device and enable it to be in "Discovery" mode. Check the owner's manual
of the device to learn how to put it in "Discovery" mode.
2
Press "Menu/Ok" on the LG Rumor2, which is the middle button on the phone.
3
Press " * " to access the settings menu.
4
Press "1" for the Connections menu.
5
Press "2" for the Bluetooth menu
then press "1." Press "Yes" when prompted to turn on the Bluetooth
feature. A list of available devices appears in the menu.
6
Highlight the listed device, which should be showing.
7
Click "Ok."
8
Enter the passkey provided in
the owner's manual of the Bluetooth device. The standard passkey is
"0000." The Rumor2 is now paired with the Bluetooth device.
9
Press the "Call" key on the
phone or the "Call" button on the Bluetooth device to answer calls
through a Bluetooth headset while paired.
Here's a link for the manual
http://vizio.com/documents/downloads/hdtv/L32/Manual.pdf
As for a scheduler there is none in the tv only a sleep timer which has to be manually set every time. You can set it to turn off in 30 minutes increments up to 120 min. This is in the menu under Special Features-Sleep Timer.
To pair another headset to the same base, you must first enable the multi-shift
pairing feature. Long press (5 sec.) the speaking volume minor adjust up button on
back of base until the power indicator light flashes.
2. Place a charged headset in charging cradle and red indicator light on base will flash
for 2 seconds if the multi-shift pairing feature is enabled. Within 10 seconds of
doing so, press either the "+" or "-" listening volume button for 3 seconds until the
headset talk indicator lights to indicate pairing mode, and goes out after successful
pairing. Repeat steps
Call vibrate*
• Call vibrate is automatically activated when you turn on your headset.
• To disable the call vibrate feature, press the answer/end button and
press the volume down (-) button at the same time.
• To reactivate the call vibrate feature, press the answer/end button and
press the volume up (+) button at the same time.
×