Panasonic CQ-VD7001U Car DVD...

if u got the remote, hold down the right side of the circle on the remote for no more than 10 seconds nd the code should appear..

Click here to download the user's guide/instructions manual.

My friend have in car panasonic Cq-vx 100u them forgot the code. now Ineed a defaul code please sir.

the red wire is on and off, the yellow is live, black is ground, blue is amp turn on, brown is suppose to go to the e-brake. the four speakers are gray, purple,green, and white (one is all (color)(+) the other is (color) with a black line(-))

the rest should be self explanatory, also you can go to any stereo shop and get a universal radio hook up harness and just match up the colors and plug it in, very simple.

send me you email and I will send you the install Manuel

KS AUDIO
Kim ( Owner )
[email protected]
www.ksaudio99.webs.com

OK JUST GOT OFF THE PHONE WITH PANASONIC AND THEY STILL HAVE NOT MAD THE NAVIGATION UNIT FOR THIS RADIO BUT YET THEY HAVE THE BUTTON ON THE RADIO. WHAT A RIP THEY CHARGED AN EXTRA 300 DOLLARS FOR A BUTTON THAT WONT WORK AND MAY NEVER WORK. SORRY GUY'S

what i have done when i had one was i held the joystick on the player for about 3-5 seconds and then pressed the mode/power on the remote and it reset the player and entered in 0000 for the code and it works. just my personal experience.

You need the remote control that goes with this DVD player to make it work it has two security devices. One you remote, you must push the power button on the remote the first time you use it. Two the security code, it is a four digit code that must be entered anytime that the device is installed into a different car. If it's code is not setup yet the code is 0000, otherwise you need to get the code from the person that installed it. There is no way to bypass the these two steps.

Yes everything has to be wired correctly for this device to work.

I dont think panasonic release one for that unit