At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I need to know how to set a Seiko Melody in Motion clock that I just purchased at a resale shop. It is working but the time is wrong. It is oblong with 4 clowns at the bottom. Thank you.
Re: I need to know how to set a Seiko Melody in Motion...
I had that clock hre. and all the insides are special from seiko, i would send it to them. the movement is encased in plastic and some lever rods attached to them . may be worth sending
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here is a manual for the Seiko Melody in Motion Wall Clock, Model # QXM123BRH:
Getting Started
Insert one "AA" size alkaline battery into the clock's battery compartment.
Set the clock to the correct time by pulling out the time-setting knob and turning it clockwise or counterclockwise to set the time.
Push the knob back in to the "Lock" position to finish setting the time.
Melody Selection
Press the "Demo" button on the clock's front panel to listen to all the available melodies.
To select a specific melody, press the "Melody" button repeatedly until the desired melody plays.
Volume Control
To adjust the volume of the melody, press the "Volume" button repeatedly until the desired volume level is reached.
Light Sensor
The clock is equipped with a light sensor that will automatically turn off the sound and motion sensors when the room is dark.
To disable the light sensor, push and hold the "Light Sensor" button for approximately 5 seconds until the "OFF" indicator appears on the display.
To enable the light sensor, push and hold the "Light Sensor" button again for approximately 5 seconds until the "ON" indicator appears on the display.
Motion Sensor
The clock is equipped with a motion sensor that will detect movement in front of the clock and activate the sound and motion sensors.
To disable the motion sensor, push and hold the "Motion Sensor" button for approximately 5 seconds until the "OFF" indicator appears on the display.
To enable the motion sensor, push and hold the "Motion Sensor" button again for approximately 5 seconds until the "ON" indicator appears on the display.
Nighttime Silencer
The clock is equipped with a nighttime silencer that will automatically turn off the sound and motion sensors during a designated period of time.
To set the nighttime silencer, push and hold the "Nighttime Silencer" button for approximately 5 seconds until the "SET" indicator appears on the display.
Press the "Melody" button to select the start time for the nighttime silencer.
Press the "Volume" button to select the end time for the nighttime silencer.
Push the "Nighttime Silencer" button again to save the settings and exit the nighttime silencer mode.
Troubleshooting
If the clock does not operate properly, try replacing the battery with a new one.
If the clock still does not operate properly, contact Seiko Customer Service for assistance.
Note: This manual is for general information purposes only and may not cover all features and functions of the Seiko Melody in Motion Wall Clock, Model # QXM123BRH. Please refer to the manufacturer's instructions for complete information on how to operate and maintain your clock.
Mine does the same thing. It plays the intro and starts the melody then goes back to the intro. I've changed batteries. If I move the song selection switch I can get it to work but only for a while.
×