Question about Maytag MAH6700AWW Neptune Front-Load Washer

1 Answer

Maytag laundry neptune front loader washer MAH6700AWW. It is showing a E3 code error. what can we do for that

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 70 Answers

Hi, the E3 error means that the control board is detecting current going to the motor, but the motor won't turn properly. If the error code comes up all the time as soon as you press the power on button, then it means your control board is bad and reading incorrectly. If it only happens during a cycle, then you need a new motor unfortunately.

Posted on Jun 16, 2011

  • Chris Hansen Dec 08, 2011

    I also was getting E3 on my mah6700 and did replace the motor. I am still getting an E3 code yet it is spinning right now, finishing a cycle on medium speed. How do you get the front panel off of the machine to check the control board connections?

  • Brett Kneprath Jan 16, 2012

    CHRIS, YOUR BEST BET IS TO PULL THE WASHER OUT AND ACCESS IT FROM THE REAR PANEL, TAKE OUT THE TWO SCREWS ON THE BACK/PLATE.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why slow spinning?


a slow spin sometimes indicates that a out of balance switch might be malfunctioning

Oct 17, 2015 | Maytag MAH6700AWW Neptune Front-Load...

1 Answer

MY MAYTAG NEPTUNE FRONT LOADER WASHER KEEPS SHUTTING OFF AND THE E3 ERROR MESSAGE IS ON THERE


Transmission or clutch assembly not engaging due to going out or slipping. even bad door switch

Sep 20, 2014 | Maytag Washing Machines

1 Answer

When I did my laundry,I forgot to put dertegent in it. At the end of the cyle,my maytag 400 4.5 cu, says f21 and the door is locked. What do i do?


Hello,

The F21 error code is displayed when the water didn't drain in the normal time,the usual reason the washer did nto drain with in the normal time is because the filter screen on the pump is clogged. This tip i wrote will show ya how to take apart the washer and clean the filter on the pump.
http://www1.fixya.com/support/r10121384-check_when_duet_washer_door_locked_after


GENE

Sep 23, 2011 | Maytag MAH6700AWW Neptune Front-Load...

1 Answer

Its flashing E3 and chiming. and stopped washing


Hi

E3 is an overload error and indicates that the washer motor is not running properly. You can take out some clothes and then restart the cycle by pressing the START/PAUSE button. After this, if the error appears again then check the motor connections, if everything appears fine then the motor should be replaced. Hope this helps...please post back for further assistance.

Daniel

Aug 04, 2011 | Maytag MAH6700AWW Neptune Front-Load...

1 Answer

My washer has passed all the diagnositc test BUT when running through a simple quick cycle it keeps beeping E3


Hi,

e3 means that the control board is detecting current going to the motor, but the motor won't turn properly. If the error code comes up all the time as soon as you press the power on button, then it means your control board is bad and reading incorrectly. If it only happens during a cycle, then you need a new motor unfortunately.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Jun 02, 2011 | Maytag MAH6700AWW Neptune Front-Load...

1 Answer

Maytag error code F My Nepturn washer stopped midcycle and the panel is flashing F What is wrong?


have a look at this manual:
Maytag manual
Its a PDF file but should open automatically and could take a minute or so depending on your internet speed.
Scroll down to page 15, this will show and tell you what the error codes mean.
I hope this helps
Regards
Mike

Mar 22, 2010 | Maytag MAH6700AWW Neptune Front-Load...

1 Answer

How do I stop the error E2 code on my washer? I


The E2 shows that there is a motor problem. This can be caused by having an extra heavy load in the machine so take some out and try it. It can also be cause by any iof the buttons being stuck so make sure they are all 'free'. If this fails then you will need to have a new motor and call a repair man unless you can do the job yourself.

Sep 11, 2009 | Maytag MAH6700AWW Neptune Front-Load...

Not finding what you are looking for?
Maytag MAH6700AWW Neptune Front-Load Washer Logo

1,748 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...