Hi just replaced batteries closed the safe now cant get in[lost keys and instructions]
thanks grant
Have just had the same problems if you had the key there is a red button inside the door to reset the code but obviously no key no red button I have the sandleford number to call 03 97750699 or try the factory pre set 159 A or B see how you go
was very helpful thanks
Thanks I didnt know there was a red button all fixed thanks again
watch this u-tube videohttps://www.youtube.com/watch?v=hcYB9cei...
×
All ES20 safes have the same default code, if your set code does not open the safe try putting in the code159A, you'll then have to reset your code and check the batteries coz thats usually what causes the problem in the first place.
This worked for me code 159a then I reset the code No Problems
×
It doesn't like the alkaline batteries! put new batteries, press the button inside opposite the opening side, a yellow light will come up set a four digits plus A or B . green light will come up the second time !
I have the same safe and i put in the code and it still wont open my key is stuck in the lock can anyone please help?
YUS, i found a easy way to get into safe!!!!! ive been looking all over da internet and nothing worked but this worked for me and it will for you!!!
Get a hammer
Keep hitting the right corner at the front ov safe as hard as you can and it will just pop open!!!! GUARANTEED
but does it wreck the safe???
did that and it didnt open!!just broke the front of it and there is a keyhole?
do you have the keys 4 it?
×
I have been told by Sandlefords in Melbourne that you can get into the safe via the knob of the front of the safe using a screwdriver and hammer, yhey wil;l take you through the procedure over the phone, it will bugger the safe but $29.00 what the hay. There are no replacement keys available so that option is out. The safe is not fire proof it has a steal wall with no insulation which will transmits heat very well and it will light up any paper inside very quickly and there.
My batteries have ran out and the keys are inside the safe, i need to get in there because my passport is in there....any help please, i dont really understand this website so could you email [email protected]
thanks glen
Just wondering if anyone knows if the Sandleford Electronic ES20 is fire proof??
Assistance appreciated
K
I changed the batteries & followed the instructions above -it fixed everything up - was just fantastic.
Find your solution from the list,
Apple Iphone Smartphone
Codes:
Software & Hardware Problems
Find Your Solutions for Apple Products:
Apple Iphone 3G
Apple iPod Touch Digital Media Player
34,431 views
Usually answered in minutes!
we try to open our safe by our password but i doesnt open we have no key
I went to put in my code and it just does not want to open. I have also misplaced my keys so I just cant't get in. how do I fix this
Our safe just wont open with the code. We have misplaced the key and just can not get in.
lost instruction for my safe how do i reset pin no from factory one sounds like im one of the lucky one still have key thanks dale
changed batterys and the pin wont work, also lost the instructions
pin not working lost instructions
hey i cant get in my safe batteries dead and the only key left is inside and i dont wanna wreck the safe coz of the stuff inside any1 got a easy or simple way to get inside without destroying the contents
Had the same problem, now solved thanks for all the info everyone.
However the key is obviously essential, can't believe so many keys have been lost, this is an essential part of any electronic safe as it bound to be needed at some stage.
I managed to find the original instruction sheet, will e-mail a copy on request to [email protected]
My safe is locked, cant find the key. I do remember the 4 pin code. If I enter my code & push the 'A' buttom the light green on the left side comes on & stays on for a few seconds and goes off, no warning alam is sounded, but the safe does not open. If I try the same code and push the 'B' buttom I get the same thing. What is the opening procedure please. Regards, SteveA
i have the Sandelford ES20 Electronic safe aswell but i connected a 6V 300ma wall connector and blew the circuit somewhere can someone tell me something usefu if you know?
Email: b[email protected]
Thanks Chris
Install instructions say to remove the emergency cover to access the emergency key lock but dont say how. Any ideas?
Hi we believe battery is flat and key is miss placed? Safe is mnaking a ticking noise and unable to open please help. Wayne
Hi we believe battery is flat and key is miss placed? Safe is mnaking a ticking noise and unable to open please help. Wayne
I went to put in my code and it just does not want to open. I have also misplaced my keys so I just cant't get in. how do I fix this
×