Electrical Supplies Logo

Related Topics:

Posted on Aug 19, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Simoniz s1900 electric power washer with no water pressure

Hi: I have a Simoniz electric washer that worked well for about 3 months and then all of a sudden lost pressure . The unit still starts and sounds the same but upon squeezing the trigger of the gun all that comes out is standard hose pressure ( say about 40 psi) . I called Simoniz and they determined the fix as being a faulty fitting where the garden hose connects to the machine. They mailed this out to me last week but i have yet to receive. I'm just doing a little proactive research as i can't see that part as being the woes to this machines problem.

Is anyone familiar with this problem , i'm reading about alot of issues with these Simoniz power washers.

Thanks

Dave

Answer This Question

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Sep 03, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Sep 03, 2009
Answers
1
Questions
0
Helped
3122
Points
1

What a jacka$$ response.
Do you think its the seals? wow that describes f**Kall!!!

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Governor:

An expert whose answer got voted for 20 times.
Hot-Shot:

An expert who has answered 20 questions.

  • Expert 154 Answers
  • Posted on Jun 14, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Governor:

An expert whose answer got voted for 20 times.
Hot-Shot:

An expert who has answered 20 questions.

Joined: Jun 07, 2009
Answers
154
Questions
0
Helped
87951
Points
355

If your only getting 40 psi the seals on the pump need replacing

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3helpful
1answer

My Simoniz S1900 pressure washer "pulses" on and off when I turn it on and pull the trigger. I have purged the pump of air as pre the company's video but nothing helps.
One thing to check is that the hose connected to it isn't collapsing and cutting off the water supply. Make sure plenty of water pressure and volume at hose as well.
Read full answer
May 23, 2011 • Vacuums
0helpful
1answer

No high pressure water
I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.
Read full answer
Jul 01, 2010 • Karcher 1550PSI Pressure Washer
0helpful
1answer

Solutions won't feed from bottles on machine? I use the switch on this machine to use a deck cleaning solution and the bottles won't feed the solution into the water.
I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.
Read full answer
Jun 25, 2010 • Campbell Hausfeld 1800 PSI Electric...
2helpful
1answer

Pressur not costant
I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.
Read full answer
Jun 21, 2010 • Karcher K2.26 Electric Power Washer
14helpful
2answers

I would like to take apart my Simoniz pressure Washer
I have simoniz 1750 less than 2 years old it works,no leaks,but water is not coming out ,thank you for any tip.
Read full answer
Mar 31, 2010 • Garden
9helpful
1answer

Where is the pressure switch located on a simoniz 1600 electric power washer?
There is a pressure switch to cut the motor once target pressure is reached. I.e. when the nozzle is closed. It's a black cheap plastic thing, right in front of the pump body. It has a white plastic lever to trip the switch. It was sticking intermittently on mine. the simoniz 1600 is quite a cheap peace of ****, needs fiddling around every time I use it
Read full answer
Sep 16, 2009 • Coleman Powermate DuraBuilt 1400 PSI...
3helpful
2answers

S1600 Simoniz gun - I took it apart and I have a spring left - where does it go? I need a schematic or something.
There are no schematics available because the manufacturer doesn't sell parts for the gun. The spring usually goes right into the end of the hose, then the little bullet like valve follows. Did you know you can buy a new gun for about $22.00 Canadian?
Read full answer
Aug 11, 2009 • Karcher Garden
7helpful
2answers

I have a Simoniz 1900 presure washer and had to take it apart to fix it. I need to know how to put it together again as it has been awhile since I have had a chance to work on it. Can anyone tell me how to...
i took my pressurewasher simoniz s1900 apart, i had to take off the pump and all oil leaked out.
how and where can i fill the oil in to the pump
and what type of oil would i use
thanx ernte
Read full answer
May 17, 2009 • Garden
4helpful
1answer

No pressure on simoniz gas pressure washer
I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.
Read full answer
May 03, 2009 • Garden
7helpful
1answer

Looking for Owners Manual for Simoniz S2600
Hi my simoniz electrc power washer will not go off when I release the trigger , leaks trough the water inlet hose , I replaced the O rings but keeps leaking ..THANKS
Read full answer
Apr 21, 2009 • Garden
Not finding what you are looking for?

View Most Popular

Electrical Supplies

Related Question

My Simoniz S1900 pressure washer "pulses" on and off when I turn it on and pull the trigger. I have purged the pump of air as pre the company's video but nothing helps.

  • Vacuums

3,132 views

Ask a Question

Usually answered in minutes!

Popular Questions

Honda EU3000IS Generator Surging / Pulsing Problem

Honda 6370C - Parallel Power Kit For...

Generac 43903 standby Generator overspeed indicator on starting

Generac 13,000 Watt / 13,000 Watt ...

My conlog meter is showing the rfcon error please what do I do

Electrical Supplies

Honda EU3000is generator will not start with electric starter.

Honda 6370C - Parallel Power Kit For...

I have a locked rotor fault message.

Kohler 14resa 14kw Home Emergency...

Top Electrical Supplies Experts

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you an Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Tenma 72-455A Audio Generator.PDF....

Tenma 72-455A Audio...

PDF Manual
Tenma 72-455A Audio Generator.PDF....

Tenma 72-455A Audio...

PDF Manual
Pramac_P6000S_Specification.pdf....

Pramac P6000s...

Loading...