I broke my remote and i need to change my tv to av and ther is no botton on my tv that says av is it posiable to change it to av?

most you can do manually check for any botton to switch

Sorry I can't tell by the video but on the side is ther a menus button? And if ther is push it and go to the channel selection or add/remove channel or where u see a place to do a auto detect.. Once there u should see a add selection and u can add channels manually with the + - buttons as up and down u should be able to add the av to the section list or it will just let u select that Chanel and exit the menu automatically.. Or u can get a universal remote pretty cheep prob like 5 buck at Walmart and do it that way or if u have cable or dish that remote will program as well.. Good luck

Without its remote control, you can't select its inputs.

You need to get the remote to work to switch on the AV circuit or ther other option is to CROSS/SHORT the processor output to switch on the AV- not recomended.
so get hold of a universal remote and the TV will respond.
check this link:

http://www.espares.co.uk/search/remote-controls/p/1090

Who is the manufacturer or the AV-X100?

You might find what you are looking for here: https://www.remotes.com/SearchResults.asp?Search=avx100

Hello,

What is the make and model of your TV?

I suspect the button your pressed would be the AV/Source/Input Button It should be one of those names.

Thanks

Dustin

frist turn on tv

press the menu botton

press the channel donw botton to go to setup

on setup press the volume +

press the volume botton again

press the source botton to enter in the plug and play option

press source botton and select store or home by pressing the volume botton

and then press the source botton again

after this just turn ur tv off and than on

-as usual; try to start tv with the power botton on set.
-press and hold tv botton on remote untill the led light stays on
-the with the rate of one second press on/off botton on remote, aim the remote at the set
-when the tv set goes off immediately press enter on remote.
-this will program your remote, but still you dont have the code for the future when changing batteries.

Press Display / " i " Button on TV remote, on-screen display will disappear.

You will have to call Dish Network.
800-825-2557