I have a HTC Legend and have just purchased a HTC BH-M300 Bluetooth headset, the problem I have is that since connecting and pairing I have no Audio from the handset touch pad or screen selections despite the setting telling me otherwise, the headset works fine and can make/receive calls no problem. The problem still exists even if I disconnect the headset/bluetooth connection. The phone is fine as I had a spare one so swapped it over and it does the same thing.

Nokia BH 905I User Manual Connect Using The Audio Cables And Adapters Bluetooth devices have no drivers for any version of windows. You have to pair it to your phone or your PC for it to work. See the pairing instructions in this manual.

vsidharth I had the same problem with my satio.. i fixed it,

what to do is pair your bh-503 then click on auto connect.. now click on bh-503 a menu pops up look for set unauthorised.. turn it on
now turn off your ear phones and back on, your satio will say connect, and will now give you the option to enter your pair code 0000.. once you done that, your ready to go.. hope this helps

Hi,

For connecting to other devices, press & hold the power button of your bluetooth headset for initiating the discoverable mode. When the led light starts flashing in red color, search for the headset from the phone in which you wanna connect. Open the Bluetooth settings, turn it on and search for new devices and pick from the list and pair the headset. After this, the headset will be auto-connected.

Regards
Vineeth

Can you be more specific? What mobile phone do you use with?

from OFF state of your BH-214, press power button until LED flashes quickly,do not unhold, stay holding & press power button until LED flashes red & blue alternately slowly.On ur PC,->Add new device, then your PC would detect BH-214 as headset. I used Toshiba Bluetooth stack v7.00.10(T) driver Win7x64 (search in google to download the installer), work fine with my BH-214 to connect with PC (A2DP 1.2 (btooth audio profile) & AVRCP (player navigation control profile)) & at the same time with my phone (HFP, HandsFree profile). Applied CSR bluetooth dongle 2.0, got from store for only $2.50.

Tool; CSR bluetooth dongle 2.0, got from store for only $2.50.
Install Toshiba Bluetooth stack v7.00.10(T) driver Win7x64 (search in google to download the installer). from OFF state of your BH-214, press power button until LED flashes quickly,do not release the button yet, stay press until LED flashes red & blue alternately slowly.On ur PC,->Add new device, then your PC would detect BH-214 as headset. Work fine with my BH-214 to connect with PC through BTooth dongle (A2DP 1.2 (btooth audio profile) & AVRCP (player navigation control profile)) & at the same time with my phone (HFP, HandsFree profile).

ok you hold the power key 40 second and you see the power light is stable now you find the device from your phone when you able to find the device you are able to pair the device using 0000 pair key.

Be sure the the headset in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF,
then hold the power button until it goes into pairing mode as discribed above.
Then you can discover it with your phone or PC. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999

i purchase new Nokia bluetooth headset BH-106 and i want to connect my laptop ( Dell INsprion N5010) plzz give some advise who to connect it.

Check your sound settings in Control Panel. If your using Win XP, go to Control Panel, than Sound and Audio Devices. Click the Audio tab and make sure, that under Sound Playback the Default Device is set to something with a "Bluetooth". For me it would be "Bluetooth hands-free audio". You might need to re-pair your BH-501 after doing this.