My Motorola MB300 back-flip has a Bluetooth problem. The Bluetooth works perfectly on reboot of the phone device. After i restart Bluetooth alone starts the problem. No device found. So i need to restart the phone to make it work again. This make me sick. Any solutions please help.

If you factory reset the phone, it should ask you to log in to your blur account. You need to register a new one under a new email address. And you have to make sure the SIM card you have has internet. If the device is stolen, it will lock down your sim so put it in a different phone to make sure your sim works. Once you set up account under a new blur account, the wifi and Bluetooth should enable automatically.

I’m happy to help further over the phone at https://www.6ya.com/expert/tarik_f88885a87e319a0d

Press and hold power button while trying to connect to new device to reset conmection

hi codes are the bets solution to unlock your Motorola black flip mobile from at&t network .to purchase codes visit theunlockspot.com here they ask you the imei number of your mobile .finally they send you codes to unlock your mobile.

You can get the Unlock code from the site
Onlinegsmunlock.com/motorola/rs7wp8/ AND unlock Motorola MB300 from AT&T.

To Hard Reset the Motorola BLUR MB300 quite differs from other Motorola ANDROID phones.

Do back up all your data stored on your device before doing this procedure, this process will delete all the data on the phone but does not delete the data stored on the microSD memory card.

To hard reset Motorola BLUR MB300
1. Power off phone.
2. Hold camera button and power on phone at the same time.
3. Release the camera button when prompted to.
4. You will see a message screen telling you to press the up or down volume button
5. Press and HOLD the down volume key (ignore message 'Volume Up Key Pressed')
6. When triangle and phone screen appears
7. Press on the screen just above the back key
8. You will now see the "Motorola system recovery" menu
At this point you will have three choices:

1. reboot system now [Menu+Back]
2. apply ssdcrad:update.zip [Alt+S]
3. wipedata/factory reset [Alt+W]
You can simply tap an item to select it.

At the bottom of the screen you can select OK to apply your choice from the menu.

There is also an opportunity to select Hide on the bottom left, I don't know what that does (I tried it and nothing happened).

Selecting Wipe data/factory reset and tapping Ok and the screen changes to a box and a phone (Get it - out of the box) and you see what is happening on the phone.
pick 2
-- Wiping data...
Formatting DATA:...
Formatting CACHE:...
Data Wipe Complete.

Press Menu+Back to reboot

pressing Menu+Back did nothing for me so I tapped 'reboot system now' on the menu and Ok.

The phone restart then will restore back to its factory default state.

Where you get that Motorola Backflip MB300 unlock code? Usually if you receive motorola unlock code, you also get details instruction how to input that code in your phone.

I have the same phone and the same problem. Recently I enter to the motorola website and i think that we have to buy an accesory that is an auricular with bluetooth i will give you the page but is in spanish so you change the language. http://www.motorola.com/Consumers/XA-ES/Consumer-Products-and-Services/Mobile%20Phone%20Accessories

you can get unlock codes here
http://www.theunlockspot.com/motorola-backflip/rs10wp9/

switch on the bluetooth on both the devices..and then search for the device in your phone.if it is visible you have to enter a passkey initially and then you will be able to connect it. this is one way, and put on the music player in the phone, switch the option in the settings to hear through wireless bluetooth.if it does not work, then try the bluetooth with a motorola phone.if it works with the motorola phone alone then it might have compatibility problems with nokia. generally motorazr is best suited for the bluetooth u have

I disabled the bluetooth from my phone. I then turned off my phone and rebooted it. Once the phone was turned back on, I paired it up with the bluetooth and then it worked. So disabling and removing everything and starting over worked.