New printer Kodak ESP 5 Error code 3821 - Kodak Office Equipment & Supplies

hi

go to this link ..it will explain how to correct error 3820

http://support.en.kodak.ca/app/answers/detail/a_id/1744/selected/true

please send me 4 thumbs up

Hi,
Your error code, 3821, means that the internal memory is screwed up!

Solution:
Unplug the printer for a whole minute for the memory to discharge itself. Anyway, that will force a memory reload and everything will be just fine.
Also, here is an alternate fix if the one above (which is the fastest way) does not work: Open and close the front door, if this does not reset the machine, turn off machine, switch back on while holding the utillity/counter key, after you see a black dot in the corner of the lcd let go of the utillity/counter key. the machine will take a while to boot up, and when it does you will see trouble reset on the lcd, press the reset on the lcd, switch off the machine leave it off for 10 to 20 sec's and then switch back on. If this does not work you have a screwed fsr, if it does work, it might come back at some point if the firmware is not up to date , the latest is vR6

Your error code, 3821, means that the internal memory is screwed up!

Solution:
Unplug the printer for 30 seconds, and then plug it in again. If you want, you can wait a whole minute for the memory to discharge itself. Anyway, that will force a memory reload and everything will be just fine.

is this the error message you recieved 1-2000 or tricode code for example 235x892. please verify what error message you recieved. Now if your recieved an erro mesage numbers you may need to reinstall the software of your printer. please download the latest software and drivers of your printer at kodak.com/go/downloads

6202 error code means that the scanner motor failed

to solve this

-Open the printer access door of your printer
-Unplug power cable
-then after 30secs plug the power able back
-If the printer is already power-up the message printer access door will appear
-Close th printer access door
-try to scan or print

If this issue not solve call tech support of kodak Toll free 1 800 421 6699
-

Try to uninstall and reinstall the driver.. Run also the clear software of Kodak located at this site www.kodak.com/go/clear

Kodak printer ESP-5 CD version 3.2 is not compatible with Vista. You will need to upgrade to Firmware 4.3 Windows XP/Vista from Kodak Printers. The drivers may be found here:
http://www.opendrivers.com/freedownload/280436/kodak-esp-5-all-in-one-printer-firmware-4.3-windows-xp-vista-download.html

found a solution for your error code 3807 "System status failed"

To resolve the error condition:

1. Disconnect the power adapter from the printer.
2. Wait 30 seconds to allow the printer to reset.
3. Connect the power adapter to the printer. Turn the printer on if necessary.
4. Wait until the printer is ready to use.

If the error condition continues:

1. Remove and install the Printhead two times before closing the Printer Access Door.
2. Wait until the printer is ready to use.

If the error is not resolved, contact Kodak.

May be the cartridge is not detected by Kodak printer. Kodak printer works with genuine Kodak cartridges and that too brand new not refilled cartridges.The brand new cartridges have a certain code that is recognised by the Printer.Kindly buy genuine cartridges as the printer may be damaged by Non comaptible cartridges.

Kodak printer works with genuine Kodak cartridges and that too brand new not refilled cartridges. The brand new cartridges have a certain code that is recognised by the Printer.Kindly buy genuine cartridges as the printer may be damaged by Non comaptible cartridges.