Erorr code -Err 1 is showing on our machine. Any ideas? Thanks.

either didnt spin or drain

Hi , could any know what F67 ERORR CODE FOR . IT KEEP SHOWING ON THE SCRREN MY WASHING MACHINE IS I XX8 BOSCH
Thanks

Maybe something wrong with the door switch for error code 1.

To reset Error codes C0500 and C0501, perform the following steps.

1-Turn the machine "OFF".
2-Press the "STOP" button on the basic panel.
3-Keep the button pressed and turn the machine "ON".
4-Do not release the button, until the machine warm up.
5-After few seconds Error code will remove and machine will reset.Basic menu will show no error on LCD screen.This means error code has been removed and photocopier machine is ready to use.

go to the brivis web page and type in serial number and error code theywill give you a code and repair instructions.adrian,,,,

Hi,
CO202 relates to tray 1 (top tray). It hasn't managed to lift the paper successfully.
Open the tray, remove the paper, reset the machine (open/shut front door) then reload the paper and try again
Hope that helps
Regards
Taminol

there could be 2 things wrong 1 the pump had failed or the brushes on the motor have failed can you send me the error code thanks

shaun

Hi
Please my Canon Color Laser Copier is asking me for a code, when i put it on it shows E350 on the table. sir what should i do.

Have been to one of these machines today. UNB will still show even if the machine is empty. I think the feedback amplifier on the main PCB is at fault. If I have any luck with it I'll post another message

error 62 means sorter is not closed . open and close your sort, the part on the left with the bins. it has a front cover and a relase that allows it to slide left away from the machin. open and close these and see what happens.