Anika Tech Support to give our clients the technical expertise IT Support including Desk Side Support, Remote Support, Project Management, Security, Business Growth and Customer service.
https://www.anikatechsupport.co.uk
https://www.anikatechsupport.co.uk/managed-it-support
https://www.anikatechsupport.co.uk/cloud-hosting-services
https://www.anikatechsupport.co.uk/projects-consultancy
https://www.anikatechsupport.co.uk/cyber-security-continuity
Before you open the case, or the hdd drawer, dowload the UBCD on another working computer and install it to a cd or usb pendrive.
http://www.pendrivelinux.com/install-and-boot-ultimate-boot-cd-ubcd-from-a-usb-device/
Click on the HDD folder and use the utilities to detect the drive and it's condition, then, if no results, check that the data cable is seated at both ends and the power cable is also correctly aligned and seated. If you are using a sata adapter on your power supply, make sure no pins have unseated from the plastic assemblies.
Before you open the case, or the hdd drawer, dowload the UBCD on another working computer and install it to a cd or usb pendrive.
http://www.pendrivelinux.com/install-and...
Click on the HDD folder and use the utilities to detect the drive and it's condition, then, if no results, check that the data cable is seated at both ends and the power cable is also correctly aligned and seated. If you are using a sata adapter on your power supply, make sure no pins have unseated from the plastic assemblies.
×
I hope this information will be helpful. Thank you for using FixYa!
Check your BIOS settings....you might need to enable SATA in your BIOS
One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive
Test all leads that attach to your hard drive including electrical extensions,IDE,SATA
the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electic extensions or just replace them they are probably old and faulty a computer needs its connections to have an end so any faulty leads will end up with a computer error hope this helps
don
119 views
Usually answered in minutes!
×