I have a Pioneer VSX-D308 reciever and I have a EQ. How do I hook it up to this reciever?

Hello, please contact Onkyo/Pioneer product at 800-229-1687 option #3. Thank you, Onkyo USA

Looking at the back..bottom right corner is CDR/Tape in and out. Connect the in on the eq to the out of CDR/tape, connect the out of the eq to the in of CDR/tape.
You should then be able to use the CDR/tape monitor button to switch the equalizer in and out.

You most likely have a shorted amp IC.

What your unidentified TV >>requires<< is the BEST Video from every video source. That would be the DVD, SAT Box. It probably has multiple high-end video inputs, right?

What your receiver needs is at least a basic composite video connection to the TV so you can set it up and manage it.

A web search for "Pioneer VSX-D308 manual" will find the manual.

ALL of the BEST Audio should go directly to the Pioneer. That includes the SAT and DVD player.

Your TV can exist just fine with basic audio from the video sources. And you could still watch it/them without the Pioneer turned of if you want.

I can't find the exact manual for free anywhere but if you download something similar like http://www.retrevo.com/support/Pioneer-VSX-D409-Receivers-manual/id/385ci977/t/2/ it should give you the basic guidance you need.

I recommend

Do some web searching for what the cables are for. It's all basic and standard.

Do you guys know how to turn up front speakers on this amp????

tape out from reciever to line in on the eq --then line out from the eq to tape in on the reciever --whenever the tape monitor will be used on the reciever the sound will then be equalized

The tape out go to the EQ input and the tape in go to the EQ output!

I have the same problem. my sandby light is on but my receiver will not turn on! I checked my power going into the power supply board that was good. But i do not have power going to the transformer or the receptacle. And both of my fuses r good. check ur fuses and go from there . If u know how to get a power supply. please let me know.

go through your mode channels to put it on surround sound

Maybe the audio amplifier IC is damaged and you gotta change it.Good luck.