How do i upload a video onto my computer - Sanyo Xacti HD1 Memory Card Camcorder

is the new computer same operating system as the older one? that might be prime reason

Once you log onto facebook, navigate to your personal profile. On the left under your profile picture you should see a link that will take you to the photos page. Click this, once you do on the upper right corner there will be a button for uploading pictures and uploading video.

how do you upload ,by using sd card or usb port?

need software load to coumpter,then only interface

Goto any radio shack and get a external memory card reader this will allow you to get your pictures if the camera or cable is defective.

Hello JKelley,
When you connect the camera to your computer using the USB cable, wait for few seconds for the computer to recognize the new member.. Now check under "My computer" ... You will have a new drive letter that represents your camera.
Double click on the camera drive letter and open it up as you normally do with other drives .. You can copy the images or videos from the drive to your computers desktop.

Let me know if that was helpful and Do not forget to rate the solution as "Fixya" :)
All the best for your Presentation.

Thanks and Regards,
Srinivas.

I changed the resolution size under options before filming and uploaded the video onto my provided picture motion program given with purchase of camera. I then switched the file to my videos under my computer so I was able to upload them onto email, and internet.

Yes...more information.

connect tothe computer with the firewire cable, plug your camcorder into the mains and open windows movie maker on your pc and press play on the camcorder and capture video in windows movie maker. Easy.

the computer might not automatically upload the file. it will detect the hardware, but not necessarily start uploading. if you have xp, try going into movie maker which is in your program list in the start menu. on the left hand side there is a few blue sentences, one is import video, another is import video from device. if you have your camera connected to the computer through firewire and have your camera on the vcr/playback mode, open movie maker and click import video from device, the computer will have already detected your camera, so the first option your given in the next screen should have the make and model of your camera to upload from.