SONY KP-65WS510 WONT TURN ON RED LIGHT BLINKS 4TIMES AND THEN OFF THEN 4 TIMES AND OFF ETC ETC

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, [Exclude the model number] in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Google the model number for six blinks for that is an error code---this set uses no lamp---it has 3 picture tubes

It is flashing a error code, check the link to diagnose your code.
http://www.somelifeblog.com/2007/08/sony-tv-led-blinking-codes-what-does-it.html

i have a sony 57". in the power button, a red blinking light blinks 11 times.
KDP57W5655

This is a indication of high voltage regulation cuircit problem. specifically the cb board. This is a board sony recomends sending to them to get fixed and adjusted

Count the number of blinks of the standby light. It will bink a count, pause and do it again (Common counts are 2 -9) Give this count to a Sony service center and they can help you know what the issue is. (Probably the lamp)

Sony KP-65W510 tv does not have any reset button.
What is the issue with TV? I might help you.

There is a problem with one or two of the diodes on the G board.
Zero Crossing Detector 9 times 9:0 or 9:1
Probable cause • D6116 or D6301 is open (G Board)
symptom • No picture
I hope this helps and good luck!

High voltage in TV got problem and thats why TV gives 10 time blink error code.
Qualified TV tech will fix it as its bit complicated fix.

I have a sony codes for sony TVs that tell what is wrong by the blinks as soon as a can will ck it to see what it says.