Automatic return on stand-by mood when power is push on

tda9380ps /n3/3/1664 using in sharp tv power supply ok ,but no EHT ,the power LED are glowing red light press program key to change green light to return in few miniutes to standby in red light. Ple help me

Press the power button on this remote control. If TV doesn't power up, check the infrared emission of the remote control, first. If it is OK; the infrared sensor inside the TV is faulty.
Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience. In some cases, the remote control might need to clean.
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

The sand probly needs to be changed .

Try jacking up car and put on stands as high as poss as you could have air returning when the pedal is returned ,so jack up car pump pedal 4 times fast and hold down bleed l/h/s/first ,do 2 times then the r/h/side and then push down pedal clamp rubber flex hose over back axlewith small G clamp if pedal good do same to FRONT

Hi Erickson,

First of all, thank you for posting your question here at Fixya.

I'm assuming here that your unit is Sharp BD-MPC41U.

The symptoms you've mentioned indicated that the power supply board of your unit gone to protection mode that's why the LED automatically shuts off. It will encountered once the feedback circuitry sensed malfunction and immediately turned off the unit to avoid further damaged.
To resolve the issue, you have to replaced the power supply board, part number RUNTKA699WJN0. I saw it in stock at this LINK or obtain it from your local Sharp service centers.

Also, don't forget to check if your unit is under warranty period (1 year), if so, avail it because the manufacturer will fix it for free. Opening the top cover will void the warranty.

Please let me know if you need further assistance.

Hope I helped you!

Have a great Holidays!!!

Ratings and feedback are highly appreciated.

Jdvillanueva

press F2 or F8 or F10 or F11 while your ur laptop is starting.
it will automatically go to a menu, which will ask u how to start ur laptop in windows or in safe mood. then select safe mood, in safe mood u will become the administrator and u can change the password.
or u can take ur important take using usb.

When u put on the monitor stand togother did u a snap on sound,yes mean the stand it snap in a hole and held it on somewhere.Look a latch or a knob pull or push on that latch or knob than push the stand up or down u should able to take it out.Or read the owner manual they should have sections on the stand and the base put in and take out instructions.

Hello, I am Nokia70 user and I like it very much but I want to get W/LAN in it so what should I have to do?

have u charged the battery fully