I have a hoover elite 1210 washer. A wonderful washer , had no problems but the lid has discoloured. Wondering if i can obtain a new lid?

Replace lid lock. It’s probably not overly expensive

My hoover elite 1210 won stop filling once it achieves it correct level

http://www.stokesap.com.au/downloads/OzSpares_Sect1.pdf

click this link and check it.

Hi,
Following will be the causes for water not draining properly
1.There is a motor/Pump which operates to to drain the water check whether that motor is working.
2.Check filter and clean it
3.Check the drain pipeline whether it clear
4.Check the inlet valve of the machine Sometimes the drain works properly but the inlet solenoid valve will not hold and the water keeps coming in and fills the drum

Thank You

my hover washer dryer 1200 spin will not spin water comes into the drum and will not spin

Hoping to be of help after the spin dry wouldnt work on our hoover elite 1210.
It would do the wash cycle fine but as soon as it needed to drain, it wouldn't.
My handy man (Husband) is great at fixing things and opened the front panel by undoing the screws.
Near the motor on the bottom left, there is a wheel/fan looking thing.
(Turn the machine off first)
He tried to spin the wheel but it would only move clockwise and not anti-clockwise like it is supposed to.
So he gave the fan a few spins clockwise before giving it a gentle pull outwards in which it loosened the wheel and was able to move anticlockwise again.
We then turned the machine on and it started spinning and draining the machine.
This machine is a work horse and I refuse to get another. They don't make them like they used to!!
Mine has a leak and we use a drip tray underneath at the moment. So long as it works. I am happy.
Hope this helps someone else with the same problem.

You can wash Shoes in it... But the manufacturer does not recomened it.. I would suggest that you remove the laces and you should be just fine
good luck

Does an Hoover elite 920 gearbox fit the hoover elite 1205 thanks

The instruction manual suggests running the "drain & spin" cycle, because there is most likely water left in the machine.