My skymedi Usb portable device of version 6.1.7600.16385 is not opening. neither i am unable to format it. if i try to open it it say please insert a disk into removable disk.how to open it_7bist

I believe the phone will need to card to be FAT32 format and the card may be formatted as NTFS. Insert the SD card into a computer. In "Computer" note the drive letter. Lets use E: as an example. Open a command prompt and type format E: /FS:FAT32
That will format it to fat32. Now try in the phone.

Try Formatting it in NTFS or Fat 32.

try to format it.
go to controle pannel > admins tools > disk managmen >> device managment, right click ur flash drive and choose format.
or u can downlaod "hp drive key"

Hi

Please do not panic

Please try the following

1) Plug the USB drive into the PV
2) Click on my computer
3) Right click on the USB drive and click format

If this fails then try a differnt USB port and also try a differnt PC

If both of the above fail then unfortunatley you have a faulty drive and it will need to be replaced/refunded

Please leave feedback/vote if my answer was helpful

have you tried it on a different usb port? if that doesnt work you may also try it on a computer

I'm a little confused as you mention both Drive E. which suggests Windows and gnome which suggest linux.

WARNING: Formatting the disk will erase any data on it. Do not format the disk if you are trying to get the data off it that was on it yesterday.

It is possible that the partition table has been corrupted.

If you are using windows. You can either try right clicking on the drive (not double clicking) from Windows Explorer (My Computer) and clicking format. Choose the file system type and go. Alternatively, you could work through the disk management administrative tool. Right Click on My Computer -> Manage -> Disk Management. Right click on the volume and format it.

If you are using linux, see if you have a valid partition table using fdisk for the device. Then, after creating the partition, use mkdosfs to format the drive. If you have formatted the drive as a linux partition, such as ext2, ext3, or reiserfs, it is likely that Windows will not see it as a valid drive.

I had the same issue with my 4GB Sony Memory Card when I put it in my memory card slot on my computer. I have a Toshiba laptop, so what I did that fixed the problem is I went to Toshibas Support Webpage in the downloads section and under the CATEGORY: Driver Card Reader and re-downloaded: Ricoh Card Reader for Windows 7 (32/64)(v3.54.02; 09-04-2009; 4.94M) and once I did that it read my memory card and didn't give me any more issues and it opened all my pictures. Of course if you don't have a Toshiba then you would go to your manufacturers web site and see if they have the same thing, because that is what fixed my issue and it didn't take long at all.

1. Download this tool:
http://dl.dropbox.com/u/4040651/HPUSBFW.EXE

2. Format

(Before removing USB flash drive click on the Safely Remove
Hardware icon and then click on USB flash drive you want to remove)

i have usb kingston 4 GB data mini traveler, and my problem usb detect skymidi usb drive i dont know skymedi. i don't want if have format,because there are many data which is of important.
how is it's solution.


thanks 4 all

by blurz

Dude I just fixed mine running the SKYMEDI tool version SK6211BA_20080917 on my 8GB kingston datatraveler 100 is hard to get it but you will find it, you need to determine what version of the sw applies to your flash drive, check the SKYMEDI website www.skymedi.com.tw