Hayward 1 12 Hp Super Swimming Pool Pump Sp2610x15 Logo

Related Topics:

Posted on Jun 02, 2011

Need a Hayward pool pump manual. Don't know how to hook up filter and pump.

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Jun 13, 2009

SOURCE: accurate pressure for 2 hp ag hayward pool pump

the psi range is normal and will fluctuate with the cleaniness of the filter. Depending on wether or not you have a Sand filter or an Earth Filter, you should periodically backwash(for sand) and "bump" for the earth filters. You will notice that the psi will lower back down to the lower psi range. This indicates that your water is flowing freely with little resistance.

Ad

james aurienne

  • 93 Answers
  • Posted on Jun 16, 2009

SOURCE: intex pool pump directions

from skimmer one hose goes into pump. outlet goes back to pool

james aurienne

  • 93 Answers
  • Posted on Aug 06, 2009

SOURCE: hayward filter problem

YOUR HANDLE IS NOT SEATING IN THE RIGHT POSITION THERE IS A SPROCKET UNDER HANDLE THAT MAY BE DAMAGED TRYSETTING HANDLE TO DIFFERENT POSITIONS SEVERAL TIMES IT MAY HAVE DEBRIS UNDER IT MAKE SURE PUMP IS OFF.TAKE HANDLE ASSEMBLY OFF AND CHECK SPOCKET

Anonymous

  • 640 Answers
  • Posted on May 24, 2010

SOURCE: hooking up filter to pump and pool

This website contains a copy of the owners manual for the S180T pool filter. It should have all of the information that you need.

http://www.backyardcitypools.com/images/hayward/pro-series-manual.pdf

It is in PDF format. let me know if you have any trouble opening it.

A Miller

  • 8404 Answers
  • Posted on Jun 03, 2010

SOURCE: hooking up five hoses to my hayward pump/filter

Your system has a suction side and a discharge side. Skimmer and bottom drain hook to the suction side. Returns (discharge) return via chlorinator or other sanitary system and heater if appropriate, to ports in the side of the pool.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hayward vari-flo sp0710xr50 install manual for piping

I don't have a manual but basically the intake of the filter connects to the area around the grids. The inside of all the grids connect through a manifold and pipes to the output port of the filter. The pump output should be piped to the return piping of the pool. If you have a heater it should be connected between the output of the filter to the return piping of the pool. If you have a chlorinator the output of the heater it should be connected through a metal-free check valve, into the chlorinator and then to the return piping of the pool. I hope this helps.
1helpful
1answer

Show how to hook up hoses to sand hayward filter

Here is a copy of the users manual for these pool filters. Page 5, specifically, should help you because it has a diagram of the filter and where the hose connections are. It should have everything you need to get it set up properly.

http://www.backyardcitypools.com/images/hayward/side-mount-filter-manual.pdf
0helpful
1answer

My filter has only been used for 2 months, it seems like there is sand on the bottom of pool, I just had new liner put in because the sand crystallized last year and I couldn't get it off. The filter...

Hayward should stand behind their filter. If the unit is only two months old, the seller should be helping you. If there is sand in the pool, it is because on the bottom of the filter is a distributor which is tubing with many thin slits. The slits are small enough that sand can not get through. If a piece of the tubing breaks or if it is not installed tightly, sand will continue to get out and into your pool. If you Google Hayward, I'm sure customer support will be able to help you.
Gary
1helpful
1answer

How long does the sand filter need to run?

According to Hayward Pools, it should run anywhere from 30 Minutes to 1 Hour, depending on the gallon content of the pool you are sanitizing. You should read the manual of your particular model and verify the sand filters pump and CFM capabilities. Manuals can be downloaded at the following link:

http://www.hayward-pool.com/webapp/wcs/stores/servlet/ProductInfo_10201_10551_14502_-1___I#FiltersSand

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.
0helpful
1answer

Need to know which is inlet and which is outlet connections

Take a look at the owners manual for these pool filters below. They have a diagram that should help you figure out where to hook your connections up.

http://www.backyardcitypools.com/images/hayward/pro-series-manual.pdf
0helpful
1answer

Hooking up five hoses to my hayward pump/filter

Your system has a suction side and a discharge side. Skimmer and bottom drain hook to the suction side. Returns (discharge) return via chlorinator or other sanitary system and heater if appropriate, to ports in the side of the pool.
2helpful
1answer

Hooking up filter to pump and pool

This website contains a copy of the owners manual for the S180T pool filter. It should have all of the information that you need.

http://www.backyardcitypools.com/images/hayward/pro-series-manual.pdf

It is in PDF format. let me know if you have any trouble opening it.
0helpful
1answer

Pool need to know how hoses hook to pool

from the skimmer to inlet pump -from outlet pump to in let filter -from out let filter back to pool return
Not finding what you are looking for?

146 views

Ask a Question

Usually answered in minutes!

Top Hayward Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hayward Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...