How do I get rid of soft clicking noises in my recordings?

Having looked at the Brennan it can't record music only copy it.
So what you need is some software such as Magix Audio Cleaning Lab. This will record the music from the record player and get rid of the clicks and noise from the tracks.
You also need a converter, these are simple enough and you can get them from Amazon. See image below you can even transfer video with the yellow RCA or SVHS lead. Your deck plugs into the red and white jacks and the usb into the computer. Once recorded you can transfer the files to the Brennan.

Well Adam,
was the environment already noisy?
Well but there is a program (Nero Wave Editor) which can help.
On the interface, click ENHANCEMENTS on the top and then select NOISE REDUCTION and it will present you with some other interface with sliders and then you move then more to the right.

Standing by anyway

A noise gate is a software that is used to get rid of noise in a recording that you don't want.

Did you ever find a solution to this problem? I have tried new AC adapter cord and it still has background noise. The only time it doesn't is with the batteries.

Make sure the webcam mic is set as default
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

You may be getting feedback from your speakers to your mic
Check by using a headset

Has your laptop got an audio input socket? If it has you can plug your turntable into that. You might need some kind of adaptor plug to connect, but your local electronic shop should be able to supply you with it. When you have the sound going in you will need software to record it, I would recomend Magix Audio Cleaning Lab. This will allow you to record the signal, plus being a record get rid of the clicks and other noise. It will take a bit to get used to but you will soon learn. You can get it fairly cheap on Amazon.

What you need is a Plug-in, Either a NOISE FILTER or DNR (Dolby Noise Reduction) Also try when you record to set up the Mic away from Speakers, Equipment, and watch your lights. These are all Noise Makers on Tracks. Even Guitar and Bass to close to Monitors will give you added noise. If you can not find a Plug-in then pull up an EQ, Find the Frequency making the Noise, Adjust the "Q" (Range of Frequency) to be NARROW, Then slowly pull down your unwanted frequencies. This will get rid of Noise, But also anything else in that Frequency! Good Luck!

Is the clicking louder, and faster, the faster you are fast forwarding and rewinding? If so, it's just be the drive reading the video back. Mine is very quiet and I only softly hear it when there is no sound, like when I FF. Can you move the box into an entertainment center, or further away from the TV?

hi, check all cables,clean connections. i have had these kind of problems in the past. also coulb be ground loop!? hope this is helpful.glen