Droped the remote in a pint pf beer will it work again

The are 4 , 5, or 6 Quarts. This is a little known brand called Royal from China. If you have one, just take a measuring jug, or a pint beer mug and add water. A 'quart' is 2 pints.

If you are thinking of buying one, run away!

https://www.google.com/search?q=Smart+Pot+SC22

..

Hi Yesenia

There are a couple of possible answers, depending on whether you're talking about liquid ounces, or weight ounces.

For liquids, there are 8 fluid ounces in a kitchen '1 Cup' measuring cup. That means 48 fluid ounces are the same as 6 cups, 3 pints (2 cups per pint) , or 1-1/2 quarts (two pints per quart).

For weight, there are 16 ounces in a pound. (One fluid ounce of water also weighs one weight ounce, which is the basis of the adage 'A pint's a pound, the world around', since a pint is 16 fluid ounces, and 16 fluid ounces of water, or near-water like some beer, will then weigh a pound' ).. Anyhow, in this case, 16 goes 3 times into 48 ounces, so it will weigh 3 pounds.

For metric, 2.2 pounds per kilogram, or 29.5735 milliliters per fluid ounce.

Cheers!

There are sixteen (16) ounces in a pint.

Yes. A traditionally poured pint of Stella is done using a 9-step process; however this does not mean that it cannot be poured the same way as many other beers.

The following video outlines the 9-step process -

http://www.youtube.com/watch?v=YW8UQ57PZXw

Not only is there technique involved, but some brands of beer may require various techniques. Here is a video tutorial that will demonstrate how to properly pour a basic pint of beer.

http://www.youtube.com/watch?v=pCZkg_R4ZL4

A full standard size keg contains the equivalent of 165 bottles/124 pints.

the level is droping but there is no sign of a leak? look hard and good. than check inside car also to make sure heatercore is ok. also note smell and color of exhaust. white exhaust could indicate an internal eng leak. cylinder head gasket or crack.

just remove the batteries and let it dry it will work again

You need to replace that part. My company had to do it last year, and we need to do it again soon. It breaks down easily and will work like that.

Call Microboards. They'll send you a part (you'll probably have to pay for it - ours was under warranty) and show you how to install it.