Hi,Ok look at the DVD drawer carefully , you will see a tiny hole , this hole is expressly to eject the DVD when the electronic eject has failed . Take an ordinary paper clip and straighten it out . now insert the clip into the hole and press , this will release the drawer mechanism and with it your lost DVD Too easy !!!
Also
Removing the back cover would only allow you access to the frame and shields which must also be removed. Thereafter the DVD deck must be removed and repaired or replaced otherwise the TV will not be usable as it will still be locked in DVD mode. The system is waiting for a trigger pulse from the DVD deck that the disc has been released / ejected before it will accept any command to switch to other sources.
Unplug the unit for an extended period of time (an hour or so). The ides is to discharge and force the system to revert to factory defaults. Thereafter, try the above again. Should that still be not corrective, then perhaps your best bet would then be to consult with and/or seek the services of an authorized Service Center (specially if still under some form of extended warranty) or a qualified professional
if the DVD unit uses a slot type entry, have you tried using a credit card like something to 'fish' / 'jar' the erring disc while pressing on the EJECT button? Spraying with a can of compressed air through a nozzle like tubing may also be considered. The idea is to float the disc to initiate the eject procedures. A likely possibility is that the center hole of the disc is stuck to the spindle of the player.
Good luck and thank you
161 views
Usually answered in minutes!
×