Why does vtech not have a speed dial? my son is

To set up a speed dial option, make sure that the phone system is in standby (no handsets in use). Make sure that the number you want to have as a Speed Dial number is in the Directory. You can type in the number (up to 30 digits) and then press Select (shared key with Menu to the upper right of the arrow keys). Alternatively press Menu and use the up/down arrows to navigate to Directory. Press Menu/Select twice. Type in the phone number. Press Select to move to adding a name with the number key. Press Select to Save. You can also add a number from the Redial list. See the abbreviated manual on page 7. Press Off/Cancel to return to the previous menu list. Press and hold Off to exit the menu system completely.

Now, press Menu (if you aren't in the menu) and use the up/down arrows to navigate to Directory. Press Select. Scroll to Speed Dial and press Select. Select a speed dial location and press Select. Scroll through the directory list and press Select when the correct entry is highlighted. Press and hold the Speed Dial number (0 or 2-9) to dial this number. See page 8 of the manual.

The abbreviated manual for the CS6629, CS6629-2, etc is available here: https://phones.vtechcanada.com/media/document2/products/%7B76B9FBDF-8471-4E06-BE52-B0E8A258E5F8%7D/CS6629-3_CAAUM_3_912.pdf .

I hope this helps.

Cindy Wells

I found the manual, so you can look up what you think speed dial is. The manual does not mention that option.
http://www.payphone.com/shop/instructions/VT-CS6219-2.pdf

Enter the model of your VTech phone into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

If you know the model of your VTech DECT 6.0 system then enter it into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

Since you neglected to specify the model of your VTech 5.8GHz phone, I can only suggest you enter it into the search box here to download a copy of the manual.

you're screwed

vtech are not very good u mite need another fone

For GE 6.0: There is a button on the base lower right corner  (NOT the phone), you need to press it once again to turn off Do Not Disturb

For GE 5.8 GHz: 1. Pick up the phone handset and dial *98.
2. Press 2 to disable Do Not Disturb.
3. Once you hear the confirmation that Do Not Disturb has been disabled, you may hang up the phone handset.

I have C110 and it does not have a speed dial function

Yes, I have had nothing but trouble with my V-Tech ia5823.
Slow to dial, dropping out going calls and now the base light is flashing at a rapid pace and will not charge the handset.
I want to return it to Wal-Mart but have misplaced the recepit.
I will never buy another V-Tech..Uniden is the way to go!