Hello.
You don't need a scanner code (pin ?) to scan. Here are the steps from Lexmark Support:
Step
Action
1
Make sure the printer is configured to scan over a network.
2
Load an original document face down on the scanner glass.
3
From the control panel, press or repeatedly until Scan is highlighted.
4
Press .
5I HAVE THE X47850 SCANER - pattlnk_1182007_1150-uparrow.gifds/images/pattlnk_1182007_1150-uparrow.gif" alt="pattlnk_1182I HAVE THE X47850 SCANER - pattlnk_1182007_1146-downarrow.gif /> or repeatedly until the I HAVE THE X47850 SCANER - pattlnk_1182007_1151-selectbutton.gifighted.
6
Press .
7
If you set a PIN during networI HAVE THE X47850 SCANER - pattlnk_1182007_1151-leftarrow.gif it:
Make your selections using the control panel buttons.
10
Press the green Start button ().
Hope this helps.
Sorry. The steps didn't quite turn out.
Here's the link - scroll to your printer:
http://support.lexmark.com/index?pmv=pri...
×
1.Disconnect the power cable from the back of the printer.
2.Hold down the Stop/Clear button.
3.While keeping the button pressed down, reconnect the power cable. A message on the LCD will display MEMORY CLEARING.
Note: The Fax, Copy and Scan buttons will remain ON until the message disappears. Only the Fax button should be ON when the function is complete.
4.Select the personal settings you require as follows:
LANGUAGE: Press the right arrow key to select the language you want to use, and then press Select.
COUNTRY CODE: Press the right arrow key to select the country you will be using the printer in, and press Select.
ENTER DATE: Using the date format dd/mm/yy (in the USA, mm/dd/yy), press Select.
ENTER TIME: Using the format hh:mm, press Select.
Select Format: Press the appropriate number to choose between 1=12hr, 2=24hr.
PERSONALIZE FAX: Press Select.
Enter Name: Type in the name and press Select.
Enter Fax Number: Type in the number of the phone line to which the printer will be connected, and then press Select.
105 views
Usually answered in minutes!
MY SCANER IS X4850 NOT THE X4270 ALL IN ONR
I WANT TO SCAN USEING MY X4850 LEXMARK BUT I NEED TO KNOW HOW GET THE CODE TO DO SO
×