I have a F6 code problem with my Whirlpool Duet FL Washer, any ideas?

check here...........

http://applianceassistant.com/Washer-Repair/Duet/Duet-Washer-Error-Codes.php

cheers

F06 Drive motor tachometer error The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes.

Potential Causes

• Check wire harness connections between the Drive Motor/Tachometer and the Motor ControlUnit (MCU), and between the MCU and the Central Control Unit (CCU)
• Check the Drive Motor
• Check the MCU
• Check the Wire Harness

Replace failed component.

Whirlpool Duet error f6 Google Search

What error code is it displaying and what is the brand model number and serial number? All units are a little different....I want to provide accurate answers....Help me help you....

Waiting to hear from you,
Eric and Ann Campion

P.S. Please keep in mind we help pay our staff with earnings from parts sales. Help us keep this valuable service free and order your parts from us. Visit our website for additional help at http://www.affordableappliance.com or for Parts Order Only, Call 1-570-622-6441

Hello Tresea , it sound like a FL code has cause this following problem at best FL" flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the overfill switch to trip. The control must realize that the trip was due to an overfill condition instead of a suds lock condition in order for "FL" to be displayed. Are you using a HE type soap? If not you must reduce the amount being used. Is the pump draining? let us know.

If it's the same as a UK version, F6 is a motor speed sense fault

How to fix a error code of E2F3 on a whirlpool duet model # wfw9250ww00

three things.... could be the motor, could also be the MCU (  motor control unit ), could be the wiring harness .  check the wiring harness between the speed sensor at the motor and the MCU.  i have run into all of those being bad on different machines.

f 06 is a in issue with the motor control board, check the wiring harness attached to the board.

Here is a link that explains the the F6 error code in detail:

http://fixitnow.com/wp/2008/10/28/whirlpool-duet-washer-with-an-f06-fault-code/