Sony MHCGX99 Shelf System Logo

Related Topics:

Posted on May 24, 2011

I have a Sony shelf stereo, 3-disc changer and now the CD tray will not open? Instead I get the "Mechnical Error" message Thx Kev

5 Related Answers

A

Anonymous

  • Posted on Nov 27, 2007

SOURCE: Erratic CD tray behavior on SONY MHC-881 Shelf system

change cd head

Ad

Anonymous

  • 3 Answers
  • Posted on Jan 19, 2008

SOURCE: shelf cds is blocked SONY CMT-HP7

To get the cds to play, and 5 to eject, you can try taking off the sides of the consul and using compressed air. As for the shelf problem, I'm not really sure. 

The witch

Francisco Mauricio G

  • 1551 Answers
  • Posted on Mar 29, 2008

SOURCE: cd tray

Tienes que abrir el aparato y cambiar la banda de impulsion de la bandeja y darle mantenimiento al mecanismo del cd.

The witch

Francisco Mauricio G

  • 1551 Answers
  • Posted on Feb 11, 2009

SOURCE: sony 60 cd changer mhc-gs300av

The audio amplifier IC is damaged and need to be replaced

Anonymous

  • 3 Answers
  • Posted on Jun 18, 2009

SOURCE: Everytime I try to open the disc tray it flashes either EX-Change or mechanical error and won't open

I have a Sony MHC-GX555 stereo and every time I try to open the disc tray it either flashes EX-Change or mechanical error and it won't open.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hi - the CD tray cannot open. It is empty - no CDs in there. I hear a buzz, but an "error" message comes on. I tried pushing on the tray while turning on; I unplgged the CD player, I put it on...

The loading tray belt has more than likely stretched or snapped.
The buzzing you hear will be the motor spinning freely.
The 'ERROR' message will show up because the tray isn't opening
and activating the 'tray open' switch, therefore the 'tray closed' switch
is permanently activated after the 'open/close button is pressed.
0helpful
1answer

Sony 3 disc changer mhc-gx880 has broken belt. How to manually eject disc tray?

You have to open the unit with screws in the back and push it out by hand, there should be a series of gears that you have to spin for the tray to come out. You may be able to gently push it by hand to come out.
0helpful
1answer

I have an Sony RX66 the cd changer will not pop to play on.

My sony stereo rx66 after finish to play the first cd stand of going to play the second one, it put the cds one of the top of the other or under the tray. Can somebody help me?
2helpful
2answers

DespLady

It is error message of HiFi when it finds problem in Tape Mechanism. Tape mechanism is stucked and needs to be reset. Open your HiFi and rotate the capstan wheel with finger and then try to power up.
0helpful
1answer

Cd error message

Try to disconnect battery contacts and connect it back. Check also if there is an emergency opening device. In some model you have a pin hole underneath the cd tray. push a staple tip inside the hole, and this will release the cd.
If the tray still does not open, you may need to have a repairman opening your stereo at your local service point.

Regards
0helpful
2answers

Err 0305

I know this is no help, but I am haveing the exact same problem and I searched and cant find anything about how to fix the problem..I wish I knew what caused it at least
4helpful
2answers

CD Changer

Common Problem with AIWA 3 disc machines. I have 3 in my service shop right now. For tray not rolling in on it's own, the drive rollers have to be changed, along with the Drive Belt. Also, for CD not reading, try CD lens cleaner.
Not finding what you are looking for?

87 views

Ask a Question

Usually answered in minutes!

Top Sony Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

John
John

Level 2 Expert

510 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...