JSJS-216 Need instructions, doorbell only works immediately after fitting new batteries by following day it stops working

Try another set of brand new Duracell batteries and make sure they are inserted correctly. If the Doorbell is wireless as many are these days, it may need pairing. There are settings so that if next door has the same bell, you can use different channels.

Living Doorbell ' Jacob Jensen Design

jacobjensendesign.com > product > living-doorbell

Cordless doorbell with a 150-meter radius transmission to an unlimited number of bell pushes. Features five specially composed signals (clear polyphonic tones) - ...

It might be your batteries. Are you using Lithium or regular batteries? Often the cheaper batteries will go down FAST!

Consider investing in a new doorbell, or buying a rechargeable battery pack so you're not continuing to replace the batteries but simply recharge them - usually overnight. Battery chargers can be expensive, so try to buy one that charges a varity of the kinds of batteries you use most often.

• Other "fixes" with doorbells include checking to ensure the batteries are properly seated - ie. press the spring down and make sure the batteries aren't grounding out on another part of the case.
• Is the temperature in your area cold? Cold will sap a battery FAST - and that's everything from car batteries to flashlight, doorbell, anything that depends on any size of battery.
• Do you have kids who play with the doorbell? Frequent use will kill the batteries.
• Do you have a battery level checker to make sure the "fresh" batteries you're putting in are really fresh? Here's a $7.95 battery checker from Amazon. Many packages of batteries also come with checker built into the cardboard container (free!) as well.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/becky_74db42375768192e

Yes change the battery on both units

SIEMENS WIRELESS DOOR BELL JSJS 203

It seems your doorbell transmitter got wet and corroded the contacts.
These push buttons are not sealed at all and thus will let rain, snow etc. eventually corrode the electronics.
Solution: Find a new push button on eBay.


Cheers

You may need to change the frequency of the chime. In this model, you need to remove the batteries from the receiver unit and wait for a while. Then replace the batteries. The doorbell unit should automatically set itself to a different frequency once you press the button, which will(hopefully) solve the problem.

It seems impossible to find the instruction manual for the doorbell. But see http://oddsnsods.net/blog/?p=68 who had a similar problem with a different Siemens model, which works on the same principles. (I can't seem to be able to remove the battery from the door bell unit on the jsjs204, but it reset itself after changing the batteries in the receiver).

Hi

To fix the issue you need to remove the batterys from both the bell push and the bell unit for 10 mins, then replace the batterys and then push the bell push so it can switch channels and be different from the house down the road

replace the button switch

Check the contactor in the doorbell. It may have some "yuk" on it preventing it from making contact.