I can not receive fax but i can send fax the printer hp officejet5610 was at the client he receive the error that says fax fail brought the printer to my workshop the printer gives the same error please help

Error Code 223 (ECM error)

The receiving product has been unable to receive an entire page even after multiple attempts to rereceive the parts of the page that contain errors. This is usually due to extremely poor line conditions.

1. Reattempt the fax reception at a different time when telephone line conditions have improved.
2. If the error persists, disable ECM. Errors may still occur, and may result in degraded image quality on the received page. However, the ability to receive the entire document will be improved.

Error Code 420

V.34 negotiations have failed from the originating product during phase four, which occurs after V.8 and before the first T.30 frames are exchanged. Compatibility problems have been observed in this area when sending to non-HP units.

Reattempt the fax transmission at a different time when telephone line conditions have improved.

Error Code 421

V.34 negotiations have failed from the originating product during phase three, which occurs after V.8, before phase four, and before the first T.30 frames are exchanged. Compatibility problems have been observed in this area when sending to non-HP units.

Reattempt the fax transmission at a different time when telephone line conditions have improved.

A fax error.

hp pro k8600 does not print a3 scale

Error code 322- There was a communication error with the receiving fax machine due to poor telephone line conditions.
Solution
Set the receiving machine to receive at a slower transmission speed
If the session fails after sending several pages of a large document, resend the document as several smaller documents.
Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Error code 358--
The remote user pressed the Stop key,
The remote machine encountered a system problem such as no paper or a paper jam.
Try
Configure the local fax machine to use a slower reception speed.
Disable ECM mode on your machine.
Try sending a fax to another location.

Hi,

The reason for the error code:
Error Code: 386, 387, 388, 389, 390, 391, 392, 393, 394, 395 Definition

There is too much noise on the line for a valid connection between two fax machines to complete. The noise problem might go away over time.

Solution

Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Error Code: 386, 387, 388, 389, 390, 391, 392, 393, 394, 395 Definition

There is too much noise on the line for a valid connection between two fax machines to complete. The noise problem might go away over time.

Solution

Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Please Click here and follow the instructions to resolve the issue.

your printer is dead and is uneconomical to repair. sorry

1 Press Setup.
2 Press 1, then press 1.
This selects Print Report and then selects Automatic Reports Setup.
3 Press ! to scroll through the following report types:
– Every Error: prints whenever there is any kind of fax error (default).
– Send Error: prints whenever there is a transmission error.
– Receive Error: prints whenever there is a receiving error.
– Every Fax: confirms every time a fax is sent or received.
– Send Only: prints every time a fax is sent.
– Off: does not print fax reports.
Note: If you select Send Only, you will also receive error reports if there is
any kind of error generated.
4 Press OK to select a report

More information? you can download manual here
http://h10032.www1.hp.com/ctg/Manual/c00095626.pdf

Are you able to receive faxes from others from the same location, if not just ask her to consult her service provider and ask to get the no checked of yours why is it that you she is not able to send fax to you only as your fax machine is capable of sending and receiving fax from others it should be dsome issue with her service provider.
If it was your All-In-One printer thrn you should not have received faxes from any one, not a specific number.

Good Luck

344 Error can be caused by a few things. One of the following is occurring:
The sending fax has failed to respond to a fax command from the receiving fax due to poor line quality or fax interruption.

The sender has pressed cancel button while the reception was in progess.

In rare conditions, incompatibility has been encountered by two faxes and causes the sending fax to abandon the fax call.

Solutions:
Fax session was using ECM. Check your fax settings under the fax set-up menu on the printer. Disable the ECM (Error Correction Mode).

Fax at a different time to see if line quality improves.

Try relocating the fax to a differnt phone plug.

Replace the phone cord attached to the fax/printer.

HP Officejet 7210 All-In-One InkJet Printer
Error code: 405

When I send a fax I have a dial tone and the fax feeds through, I hear the other end answer it says it is sending and then I get the printed page that says: "A communication error occurred during the fax transmission."