You can try this (it may or may not work for this model; it does for the Zenith XVB342 and XVB442 combos):
On the main unit, not the remote, and with no discs in the DVD tray, press and hold [ STOP ] button for 5 - 10 seconds, then release. Progressive scan should now be switched OFF (the display indicator for progressive scan should disappear) and normal video output should be restored.
Hopefully it works (there are no available manuals online for this model).
Progressive Scan Video provides the highest resolution
pictures with less flicker and line structure
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
DVD/VCR Receiver to a standard (analog) television,
set Progressive Scan to Off
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To ON and OFF this function, Press "Setup" to display the setup screen.
Surf through, and hilight "Progressive scan" and press "Ok or Enter"
Here you can set this function ON or OFF. If you wnat to get it OFF, select OFF and press Enter.
OK.
116 views
Usually answered in minutes!
×