Configuring (changing) barcode reader suffix

Gryphon™ Family

Datalogic https://www.datalogic.com > marketlit > manuals PDF settings before scanning the ENTER/EXIT barcode a second time, which will then accept your changes, exit Programming Mode and return the reader to normal ...

• 
  

  QuickScan™ Quick Reference Guide

  https://www.datalogic.com > marketlit > manuals
  PDF
  ?crit de la part de Datalogic Scanning, Inc. ou celui de ses filiales ou de ses ... Etat de veille/suspension USB d?sactiv?, entr?e en veille = 0.6 sec.
• 
  

  PowerScan PBT7100 Cordless Product Reference Guide

  https://www.datalogic.com > marketlit > manuals
  PDF
  ENTER/EXIT PROGRAMMING MODE. Double Read Timeout = 0.5 Second. Double Read Timeout = 0.6 Second. Double Read Timeout = 0.7 Second. Double Read Timeout = 0.8 ...
• 
  

  QuickScanTM Lite QW2100

  https://cdn.datalogic.com > Download
  PDF
  ENTER/EXIT PROGRAMMING MODE. Double Read Timeout - continued. $CSNDR32?. Double Read Timeout = 0.5 Second. $CSNDR3C?. Double Read Timeout = 0.6 Second.

This manual may have the right barcode images to program your scanner.
http://www.posguys.com/download/QS6500BT_Manual.pdf
If not, a call to the manufacturer is how I solved the "how do I program the scanner" issue I had to solve.
Best of luck! Jon : )

The barcode reader is something that the backup software typically uses to identify which tape it is dealing with.
So typically your backup software can already natively read the barcode and therefor you don't need any other software.
The linked barcode reader is probably for reading a barcode that was provided via a picture (from a scanner or camera). This has nothing to do with the barcode reader that can be part of a tape library. NET UPC Barcode Reader

Sorry to say its not possible to change the OS to windows. but i do have some vgiper.net's which are windows based. i could sell you. PM me for details.

Sounds like you need an updated driver for your POS scanner.

Other than that, try checking the scanners setting your software and make sure it is set for 39 and 128 bar codes. There is usually a setting that will specify what codes the scanner is going to read.

You can always shoot an email over to the datalogic guys and see if they have any more input on the situation.

There are a few questions:

What kind of cable do you use?
USB, SERIAL, PS2

What kind of computer?
Normal computer or Laptop?

Then...

When you recieve the scanner like new you always have to program it.

First you do

Reset to factory defaults.... Never do this with working scanners

then

you have to program it.

First the Connection type
and then if needed a computer type.

After that you usually have to scan a suffix.

This means when you scan a barcode it needs to do something after.

normally it doesn't give Enter after you scan.
That is what the suffix is for.

and then you scan additional symbologies to scan

Like Code 39, UPC A etc. etc.

It needs to be programmed with the manual you recieved.
if you don't have it you can download here.

http://www.scanning.datalogic.com/sitefiles/manuals.aspx

go down in the list to quickscan 6000
and programming manual.

please don't print all the pages. only what you need.

If you need more help i will hear it.

good luck.

hi

the cable is USB?
if you have usb cable, you read the manual paper "default".
if you have cable rs232 you must install on a PC emulator "softwedge". Open icons and set a comm. Prefer you answer. bye Roberto

La configuracion por defecto en el lector puede necesitar cambiarse para el tipo de codigo de barras que intentas leer. Descarga el manual para cambiar los parametros del tipo de codigo de barras que intentas leer. The default setting in the reader may need to change the type of barcode you are trying to read. Download the manual to change the parameters of the type of barcode you are trying to read.http://www.ute.com/files/manuals/103_MS210%20Users%20Manual.PDF

Whether or not you can set this feature depends on which interface type you are using if you are using wedge interface then the procedure is described below: The extended Header/Terminator keys for Wedge Interface users can be customized by defining them through a simple keyboard setting procedure. For example, the Numeric Keypad keys can be set for use as Headers or Terminators by substituting the default extended keys using this procedure. The type of computer or terminal must be selected before activating the keyboard setting command. Press and release a key to set it. Some characters may require more than one key pressed simultaneously during normal use (refer to the manual of your PC or terminal for keyboard use). The exact sequence must be indicated to the reader in this case pressing and releasing the different keys. Example: If one has to press the "Shift" and "4" keys simultaneously on the keyboard to transmit the character "$" to the video, to set the "$", press and release "Shift" then press and release "4". Each pressed and released key must generate an acoustic signal on the reader, otherwise repress the key. Never press more than one key at the same time, even if this corresponds to the normal use of your keyboard. Press "Backspace" to correct a wrong key entry. In this case the reader emits 2 beeps. Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard setting procedure. "SHIFT" must be repressed for each character and cannot be substituted by "CAPS LOCK". Check page 31-33 of the "heron reference manual", downloadable near the bottom of this link page; http://www.datalogic.com/_vti_g2_dwnlDett.aspx?idCF=1&idC=44&rpstry=13_ Hope this helps :)