I have a sanyo ds25320 tv that is stuck on the aux channel and will not change to reg tv.

Should be any store that sells TVs,or online at Amazon or at E-Bay,
God bless your efforts.

i have a sanyo tv dont have the remote i was getting all channels with cable its stuck on 1.1 cant get it back to channel 3 to watch cable

just scroll thru the tv inputs,either RCA or HDMI

Hello
Your sanyo TV has no menu button on its front panel control. Without its original remote, it is immpossible to get ito its AUX. OK.

Our old tv is stuck on Channel 2 and will only change ot aux. Help!

Hi having a quick read trough the manual and finding the remote on the internet suggests this is the correct remote for your TV. The remote is not a universal remote so no programming is possible or necessary

do you have an input, tv/video, source or a/v button on your tv set if you do, press that, and it will change it

Here is a list of faults for that tv. Is recommended to take to a qualified repair shop. I could not find a recall for that set, only a complaint about a different Sanyo set that should have been recalled. Find that link here http://www.my3cents.com/showReview.cgi?id=41608 and the link for some known or I would assume common faults listed for quicker repair for Sanyo televisions. http://www.euras.com/repair_tips_1/SANYO/DS25320/DS25320_SANYO.htm

Hope this helps. Ratings are very important to us so I want to thank you in advance for taking a moment to rate my response.
Matt

A POSSIBLE solution. I have the same stet...got it used, but it's in good condition.
It was stuck on a channel. I went iinto the menu and fiddled with the channel programs and "deleted" the channel and now I can freely change channels.

By the way, I could use a manual for this ...got one?

Yes, go to remotes.com for a replacement. Around $40.00