Here is the link but I copied the instructions here too http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000035709.pdf Loading Staples or Nails Make sure there are no staples or nails jammed from previous usage by checking the handle operation. CAUTION: IF A STAPLE OR NAIL IS JAMMED, POINT THE GUN AWAY FROM YOURSELF AND OTHERS BEFORE OPENING THE TRACK AS THE JAMMED STAPLE OR NAIL MAY BE FIRED OUT UPON OPENING i) Point the bottom of the gun away from you and turn gun sideways. ii) Turn gun up, grip track release buttons and push away to release, then slide the track out, as shown (fig. 1). iii) Insert a strip of staples in the chamber with the legs pointing up (fig.1a). If nails are required, turn gun upside down and tilt the gun away from yourself and load on the right hand side (as indicated on graphics at the staple and nail exit) with point facing upwards (fig.1b) THE GUN MAY JAM IF NAILS ARE INSERTED IN THE WRONG SIDE. iv) Slide staple or nail track back into closed position - a click indicates that it is locked in position.
*Arrow
Your staple and nail gun is now ready for use.
739 views
Usually answered in minutes!
×