Konica minolta bizhub c250- error code c-0212

NVRAM= NON Volitatle Radom Access Memory. Need to have the firmware flashed and Mite also have the NVRAM replaced can not get on line secure Konica Minolta site. That Memory kkeps track copy count and certain machine info Serial Number etc.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

magenta toner cartridge EEPROM access error, cleaned the connection between the toner cartridge and the machine once cleaned if the issue persists remove the toner cartridge and put back in again if again the error persists replace the toner cartridge with a new one and last resort if the issue is still not fixed then replace the mechanical control board.

here is the link
http://www.ebookbay.com/ebook/938/konica-minolta-bizhub-c250-sm
if you have any problem contact me.

Download

here is the link to download service manual
http://www.ebookbay.com/ebook/938/konica-minolta-bizhub-c250-sm

if you have any problem contact me.

Download

konica minolta biz hub 920 error code sc 52-09

Something is going wrong with your LCT!
I am looking into it!

Hi

I have come across this kind of problem.

Is your BizHub on the network? If yes, please switch it off completely, and take the Ethernet cable out of the BizHub.

Wait for atleast 30 seconds and reconnect the cable. Now start the printer again and see if the error message goes away.

Hope this helps!

are you sure that you have a correct model and malfunction ccode ??? i cant find this code on bizhub C250

i think that your fax is not set up right, or maybe the machine is missing admin and machine e-mail address, that can cause too this problem.