Polaroid TDA-03211C 32 in. LCD HDTV Logo
Anonymous Posted on May 19, 2011

I have a Polaroid TLX-04240B It comes on and Displays the Polaroid logo, then it goes to a black screen with the HDMI1 input box on the top right hand corner. THis box eventually disappears, leaving me with a black screen. The menus seem to work. But the signal only dispalys a black screen. When no source is connected, it will display the blue screen stating no signal. Apparently it is getting the HDMI signal but unable to display it? I have taken it apart and inspected the capacitors, which all appear fine. Any ideas troubleshooting ideas? (I'm used to working on laptops, but have little experience with TVs :)

1 Answer

Chi Chu

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Polaroid Master 8,457 Answers
  • Posted on May 19, 2011
Chi Chu
Polaroid Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 01, 2009
Answers
8457
Questions
0
Helped
2821064
Points
26282

Buy another HDMI cable.Try another HDMI cable with another HDMI hub on the tv port.If u still have the same problems,mean the whole main tv Tuner signal board have problems and the caused.Tries websites like Shopjimmy.com,Ebay.com to buy a whole new refurbish tv Tuner signal board for the replacement.

  • Anonymous May 19, 2011

    The HDMI cable works fine on another display. I suppose it could be an incompatible cable, but that isn't very likely. There are only 2 HDMI inputs on this TV, and I think they both use the same hub, I have tried both of them, in any case.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

When I turn on my Polaroid tx- 04240B flat screen the picture comes on with the name Polaroid appearing the right away screen goes to black.

Firmware corrupted. An update is necessary. Contact any service technician. If you wish to get more details visit the site linked here. http://electronicshelponline.blogspot.com/ http://homenol.blogspot.com/ Search the site by type in the brand name of your device in the search box at the top right of the display window to get gathered all the related posts.
0helpful
1answer

I have a Polaroid, model number..TLX-04240B, the tv will turn on but after a few seconds the screen goes blank..please help whats wrong with my tv?

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
Type in the brand name of your device, in the search box [at the top right] of the display window, and press enter to get all related posts. It will make surf easy.
1helpful
1answer

I have a Polaroid 42" TLX-04244B. When turning the power on the polaroid logo comes on for a sec. then screen goes black with the blue power LED staying solid. Im pretty sure the power suply board isnt...

The Inverter is trying to produce the high voltage to light the backlight. It looks like it cannot hold the charge to maintain the high voltage level in order for it to stay on - you get a momentary display at initial power-up thus see the logo. Replace the Inverter board.
12helpful
2answers

Polaroid TLX-04240B going to a black screen after running for 2mins. Any ideas on how to fix this?

open the black plastic panel and the aluminum panel which has 3 screws each in the back of the tv.
look at bottom left corner of top board. to the right of the red led light,
there's these four white small switches. turn the bottom two switches to "on" and tv should be working.
It's very simple to fix the problem to everyone.
My tv capacitor was not the problem.
I hope this will help everybody.


479d164.jpg
0helpful
1answer

I HAVE POLAROID TLX-04240B TV,HAS PICTURE STAY ON FOR AMOMENT &DI

I'm looking to purchase a broken TLX-04240B, the screen on ours is cracked. If you did not fix yours, I would be interested in purchasing it.
0helpful
1answer

I have a polaroid 42 inch flat screen and the screen is solid blue when i plug my cable in it is black I can here sound but no picture it is a 2007 module tlx-04240b

Make sure all the connections are correct, a "blue" screen indicates no-signal, black indicates some type of signal is getting to the tv. good luck Julio [email protected]
0helpful
1answer

Screen goes black after about 10 minutes...POLAROID TLX-04240B

Simple Fix Repaire the backlight
repair man sure www.teexp.com

dont shoot the messanger!


Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

18helpful
2answers

Polaroid tlx-04240b loses picture

I'm very appreciate to jranada's solution, my tv gets new life.
It's very simple to fix the problem to everyone.
My tv capacitor was not the problem.
I hope this will help everybody.




c79cda1.jpg
Not finding what you are looking for?

892 views

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...