My dc17 squeals when the brushes are rotating. I have replaced the brushes twice and the belt three times. It has been back to the factory twice and they say they have done the same thing. The suction is still there but it is getting to the point I might have to wear ear plugs to vacuum any suggestions.

SOURCE: brush and belt no longer rotating

My vacuum does not have suction and the belt is no longer turning the brush

SOURCE: carpet setting not working

there is a belt in the nozzle that is driven by a small motor in turn will drive the roller when set to carpet. did you completely dis-assemble the nozzle? ie, to remove the roller and clean the endcaps? this would also show the belt. The gear on the motor wears very easily and could also be worn. I would change the nozzle or get a new Flair. new nozzles cost about $25-$30.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_b96ba3f038cf317c

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

SOURCE: rotating brush will not turn on my Dyson DC07

Yes I had the same problem on my animal Dysom. There is a button on the top of the dysom that turns the cacuum on. Right beside that button is another one that turns on and off the brush!!! Good luck!!! I accidently one day bumped that button and couldn't get my brush to work but after troubleshooting it, that was my solution.

SOURCE: The brush bar on my Dyson DC17 stopped turning.

how do I get to the top belt spindle on a DC O7 animal (purple one) to be able to change the brush bar

SOURCE: Turns on, brush rotates, but no suction.

This could help you:

http://www.fixya.com/support/t2827418-very_little_suction_in_hose_no_tears_in

It worked for us.