How do I hook up my HD TV to the kenwood kr-v7080 so I can hear stereo TV ?

Hi,

please check the wires of the speaker for damage. If interchangeable with the other working speakers, please temporarily swap them at check if the good speakers continue to work. If so, then you would need to most likely get the rear speaker replaced or repaired.

Thank you.

No bass like speaker isnt working? If so first thing a would try is switching speakers...If it fixes that channel then its your speaker.

If the speakers used to switch off when the headphone plug was put in the socket, suspect the socket it goes into as being the trouble. It is clearly not connecting the speakers, when the headphone plug is removed.

What brand of tv are you trying to hook it up to.Be more pacific in your details,We are not mind readers.

OK I am going to suggest two aerials for you. I would also NOT use the old cable as it will cause a lot of problems. It is best to replace it with the stuff they use for satellite dishes (see image).
The FM aerial will pick up signals from all sides. The TV aerial should give high quality signals and output for at least 5 sets.

You need to make sure you ohms are correct if there too low this will happen to protect the amp.

Use SCART lead from Sat. box to VCR input( so you can record progs.) then another SCART lead from VCR output to TV set AV1 input. Connect DVD (player only I presume) direct to AV2 input of TV set using another SCART lead.
Hope all this works O.K.
Note:- If DVD is also a recorder then you don't need VCR as a recording device and leads will need to be altered accordingly, of course!!

Here is a link to the manual:

http://www.kenwoodusa.com/Support/Home_Electronics_Owners_Manuals/#_

turntable needs high sensitivity preamp. the output level is so low that it has to be amplified more. usual inputs of turntable are phono input. needs a high sensitive input to handle.hope this help.