Connecting my laptop to my sansui 42" lcd tv via the hdmi cable, i get clear picture but no sound

sounds like the picture on you tv is set on fit to screen mode try under menu set picture to different setting there should be a normal setting

Check the video comparability page at its user manual.

If you have "HDMI" port then that will give you the best picture. Just connect HDMI lead to both and select the HDMI input through your tv remote and the picture will show. If not you van connect via the VGA output if you have a vga cable. Same process.

No,try websites like Ebay.com or Amazon.com to buy a HDMI cable.Plug the HDMI cable in ur computer USB hub and the other side of the HDMI cable to the tv HDMI hub.Go into tv menu goto the tv find the wright input of the HDMI cable is in ur tv input there it is ur LCD Tv as a computer monitor.

howto get the hdmi signal thro hdmi to dvi cable in plasma pdp42 sansui tv in dvi input

What type of video card does your pc have??? if it is an nvidia card, you have to go to the control panel and set up for dual monitor..when you connect your laptop to an external monitor, you have to press control and f8 keys for couple of times ...that adjust the color to 256. Are you doing that?

Let me know

go into control pannel and acer hd set it there and also in sound, a wee bit of trial and error but its there. mine was the same, it cost me ouch on the phone! good luck mine works ok

Check the settings in the TV set for HDMI sound on the input of the TV that you are using. Try another HDMI cable. It may be defective.

It is also possible that there is a compatiblity problem for the HDMI sound between the TV and the computer's sound protocol.


Jerry G.

remote from cable box has a zoom , press #