Ref sagem itd 612 will download 89 tv and only 1 radio and every few minutes graphics display other chan have been detected. keep trying but to no avail.

Hi Gary - I copied this from the RIO NIKE manual:

mode button
Press MODE to select the setting you want to change.
The normal display is replaced by the adjustable setting.
Use the + and - buttons to adjust the settings.
These are the settings you can change.
1. Main Channel (1-14)
2. Sub Channel (1-38)
3. Channel Scan (ON/OFF)
4. Sub Channel Scan (ON/OFF)
5. Button Confirmation Tone and Roger Beep ON/OFF)
6. Vox (OFF, ON LO, ON HI) (psc[communicate wxonly)
When you have proceeded through all adjustable settings, the normal display will reappear. Or, press TALK at any time to return to the normal display.

select main channel
There are 14 main channels.
To select main channels:
1. Press MODE until CHAN is displayed.
2. Press + and - keys to select the main channel.
select sub channel:
Each main channel has 38 sub channels, sometimes called
CTCSS channels. Select one of these sub channels to transmit
on a channel that is free from traffic.
To select sub channels:
1. Press MODE until SUB CHAN is displayed
2. Press + and - keys to select the sub channel.
Note :If you select channel "0," you will be able to receive transmissions from all the sub channels of the main channel you selected.

Download manual:

Dear,

There are two points.
1. Ensure that you are downloading and installing the correct driver for your graphic card.

2. If the fist condition is fulfilled then unplug the graphic card and check the system with the built in graphic card in motherboard and install its driver and get its functionality. When you are ensured that system is working with its own built in graphics then plug it again properly and install the driver. Ensure the proper plugging of your graphic card. Sometimes improper plugging of card cause this issue.

The second step will confirm the two things. one that your motherboard is functional with its own card and the reason is extra graphic card plugged in slot.. and the 2nd is that the card itself causing the issue not the motherboard and the issue was replugging...

best of luck...feel free to ask more...

Hello! The guide might be set to only HD. You will find this out by going into the guide. At the top Left of your guide, you will see that it says left to the right of the DISH Network logo. If it says ALL HD, then just press the GUIDE button again, until the list says ALL CHAN or ALL SUB. This way, you can view not only HD channels, but SD channels as well! Hope this helps!!!!

Becki Barned
DISH Network Customer Service

Use http://www.downloadvideos-convert.com/download-videos-music

1. Download Video Download Studio, install it.

2. Go to the interface, you can download (Automatic capture) the YouTube video there directly. Tab Download to Convert, you can also click "Add" button to upload the videos from computer. You can also edit video by trim and crop functions.

3. After the video display on the Video Download Studio, click "Profile" and choose "General audio", then select an MP3 format. Set destination file, clicking Convert button to complete the task.

Not only convert video to MP3, but also support batch conversion. Safe and easy to operate. No Viruses, No Spyware, No Adware. Do not hesitate. Have a try!

When you bring up your guide look at the top of the screen and you will see the LIST: if this says ALL HD then press the guide button until you see ALL SUB or a menu and select ALL SUB. If your guide keeps changing by itself its possible to have remote interfence since you have a UHF remote, especially if you also see channel changes as well. Try setting the guide and go from there. If you still continue to have issues call 1-800-333-3474 for tech support for extensive troubleshooting or at dishnetwork .com/tech.

Yes you can disable the monitor network setting which should stop the behaviour. I have seen it too, its annoying and very odd.

I left it plugged in while watching a DVD for about 90 min (as Sagem and DVD are all connected up with the TV). Afterwards I noticed the Sagem was now displaying Er09. I tried pressing the green button on remote control to activate the Sagem and hey presto everything came back on (with a message saying that the download was now complete). All back to normal now. I think the 00 and flashing dashes just meant that the Sagem was downloading and that this took longer than the specified ' few minutes'. Not sure what the 'improved DTV' was though - I can't see the difference!

Try the default code 0000

i have two tvs 1 is an Ilo and the other is a Sylvania. the code for sylvania works for both tvs on the Direct Tv Remote Hope this all helps and here is the code. 10171, there are also two other codes for this tv and they are 10054, and 10030. Have a good day and happy watching.
Darklove_420

Unplug all power (battery too) and wait a few minutes. Plug in power and 12:00 will start to flash. Press "set" and then release it. Now press any of the two buttons to the right of "set". One will increase time the other will decrease time. Hold the button down and time changes faster. Do not press any button when you have obtained the correct time for at least a minute or so.