The ovens in the rangemaster will not work as the timer is not working. The timer will not flash and when it does decide to flash it goes right back to non flashing zero. Can i use the cooker without having to use the timer

Hello Anon61,

Wow, that is a lot of problems with one cooker.
First of all, there must be an inspection of an engineer.

I am afraid he will tell you to buy a new one, as repair with so many troubles will cost a lot of money.

Timers are often the source of problems.
When that occurs, the oven that is controled by the timer will not work. For the Rangemaster Exel 110, the left hand oven is served by the timer, so this oven should not work too.
In this case, I would test the element in the right hand oven, as I think, it is gone.
When this cooker has an ignitor that works by pressing the knob, then all knobs work like it is one knob. That means, if no sparkplug ignites, then there is a problem with the ignitor or with the wireing.
When there is at least one plug that ignites, then the problem is in the contacts of the other knobs.

The light of the oven is a neon light, that only needs a very small amount of current. I think, that this light is on because of other electric problems. As soon as those problems are solved, the oven lamp will work again as it should.

I wish you a wonderfull weekend and a lot of succes, Dik

• Hello David,
  
  when the clock does not work, the (left hand) oven will not work too I suppose.
  Often when the clock does not work, it is only the timer that does not work. In that case, the timer can be bypassed. The oven still works then, but without the timer and the clock will also work as a clock.
  So no timer.
  
  When it is an older rangemaster, and the ignition does not work, then probably are some wires leaking. I that case the power for the spark does not come to the burner sparkplug.
  But when all plugs do not spark then there are 2 possibilities I think.
  
  1 the ignitor is gone
  2 the ignitor does not get power
  
  I hope this helps, I wish you a good weekend, Dik

Leisure Rangemaster 110 Electric Range Cooker How to bypass

Hi Stella,

i am sorry for you, but you can forget repairing the timer.
You can replace it of course.
You do not need the timer to operate the oven.
For that you need to bypass the timer. The clock will stay working normally.
Although the 55 is smaller then the 110, the working of the clock should be the same.
Net link will give you more information and I hope you will fin the solution there.
Kind regards and a good weekend, Dik

Leisure Rangemaster 110 Electric Range Cooker How to bypass

Cooker dead or oven not working or clock flashing - YouTube

? 3:05
https://www.youtube.com/watch?v=FDz4UpFMXq0
Dec 20, 2011 - Uploaded by Richard Saupe
Can be quite a problem when your cooker or oven is dead and always ... want to use it. watch this video on tips to re set theclock and get it up and ru. ... I try to set time I'm after a video clip on how to change the timer any help .

My Rangemaster 110 oven will not light, the timer/clock is ...

www.howtomendit.com > Kitchen Appliances, Gas Cookers

Free repair help - rangemaster 110 oven will not light timerclock broken too. ... I turned off mains electric then took out the 5 screws .... all I was interested in was bypassingthe timer and not fixing the timer -like others ..... Like I say, you will have no clockfunction but will be able to use the oven in the way it was meant to work.

good day,
hope this link below will solve your problem.

ovens

I know the answer. You ,must set the clock else the oven(s) wont work.

http://www.rangemaster.co.uk/Siteimages/Site_311/Pdf/ProfessionalPlus110DFOct08.pdf
User manual.
When the clock is first connected, the display flashes ( 0.00) and (?) alternately. To set the time, turn and hold the Timer knob to the clock symbol (?) and at the same time turn the Adjusting knob left or right until the clock shows the time of day. Remember this is a 24-hour clock. Let go of the Timer knob and it will spring back to the vertical, oven manual setting.
It is on page 6 of manual

phone rangemaster they can advise how to change the spark in egnition and supply bit. 08707 895 107

good day,
hope this link below will solve your problem.

ovens

Hope this helps with your dual fuel version 3 weeks on and working perfectly! Rangemaster 110. Ovens not lighting due to faulty auto/clock. FIXED! Our clock /timer kept flashing and would not reset
Someone, somewhere on the internet had the solution to my problem but I can't find the link again to thank them! If you don't mind losing the clock/timer auto function this is for you and it's free! Just takes a bit of time.
Basically you need to lift/open up the LH &RH hobs to get at the wires behind the clock. You should see 2 blue(neutral) wires coming directly from the back of the clock. Pull them out and connect together - should be easy to click them together. Then the ovens will light - but you will lose the auto/clock/timer functions. We only used the timer so not a big issue. We didn't take the control panel off but we did take ages to unscrew the hobs etc Probably took us about 2 hours going back to instruction manual we found on internet and trying to work it out but I think we've saved a lot in not replacing the unit with the usual call out charges. We made sure electrical supply was switched off and just took our time. Really chuffed!
Comment by tinling, posted on Nov 06, 2008 http://www.rangemaster.co.uk/Siteimages/Site_311/BigMedia/RM110Gas_04_06.pdf

This should allow you to see the instruction manual for the 110. There was another one somewhere showing a diagram of how to link the 2 blue wires at the back of the clock but I can't find it again! By the way our cooker is 10 years old so maybe different from newer models. We didn't have to take of the front control panel we accessed everything by lifting up the hobs to get behind the clock/timer.

Hope this helps! Ovens still working just got to go and buy a wee timer.