Canon copier ir 2016 system error E007 - Canon iR 2016i Black and White Copier

Easily found. I've just searched online for "error code e007 " and the first hit was for canon ir 2016. I guess that the difference in models is not that critical. So, go to "copytechnet.com".

system error E007 the canon IR 2022"..

The fusing unit needs to be replaced or repaired. Contact your dealer or service person

Hi!

The error E007 is the fuser film that's faulty!Its got a white patch on the side and the machine is not reading the patch!If there is a canon dealer close by they can replace it as u need to strip down the machine to get the fuser out!Its a separate spare and wont be expensive!!

Good luck!

it error code means fuser unite problem please change fuser unite then solve your problem

so you have o ghang the fixing film

 I  HAVE PROBLEM IN CANNON COPIER IR 2016, ERROR CODE E007. KINDLY HELP ME TO SOLVE THIS PROBLEM

System error e007 for canon copier ir2016j copier needs solution

The erreor code E007 has to do with the fixing ***'y upper film ***'y or roller. It is saying that the film is not moving in and out of "HP" Most of the time it means that the fusing film is torn and not moving properly. If you are getting paper jams in the fusing area and or unfixed or smeared copies. You most likly need to have the fusing film ***'y replaced. It could also be that it is out of place and needs to be readjusted. The only problem is that it's a little tricky to get to and not a bad idea to have a new film to replace the old one while you have it out. Good Luck

hi how do solve this problem system error E007