Television cable circuit frequency circuit diagram

Electronics engineer student that can't spell Engineer??? I feel sorry for you man! Also, you wrote "Pls" for Please .....are you a lazy student?

Stop using shortcuts if you intend to be an engineer, and be methodical with your writing as well as your work.

I'm afraid I cannot comply with your wishes, as there are copyright laws governing this, for one. (For existing circuitry)

Two, there is the liability issue. Take for example that I design the requested circuit, give it to you freely, and you or someone in your group is injured using my circuit.

Will state that this is a basic circuit design. I believe that if you 5 put your minds together, you can build this circuit.

Ck 3 low ohm resistors 2.7 ohms they will be on same board as ICs.

Try resoldering the pins on the ICs first. If that fails to resolve the problem, change the IC responsible for RED. You should be able to determine that from the service manual. In that area you should also see either fuses or low valued resistors that feed the STKs. Check those as well.

Let me know if you need further info.

Dan

count me in

hello sir, i need a circit of ups and usb and other circuit.i am student of DAE in electroics this diagram need a project of DAE send me plz i shell be very thankful you.

You did not mention what type of problem you facing during driver installation.

Any way, if you don't have proper driver for your laptop, you should go to HP website
or copy and paste this link to your Internet Browser http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers

and put your product service tag code which you can found on the back side (bottom) of your laptop. and press enter.
Then you can found the appropriate driver for your lap top and you can easily install it directly from the web site or download the deriver and make installation as per your requirement and use.

Thanks.

[email protected]

Please first have a full knowledge of cpp and then try for it other wise its impossible....