First of all this is not my scanner, it is a friends radio (sorry -- I have 2 Bearcat 245XLTs and a Pro-2051). I have no idea what the problem is, it is only scanning on the trunked frequencies (EDACS), and not the IDs. On the other hand I have no idea if he has any IDs programmed in, or what. This is a "foreign" radio to me, so it is all confusing. Is there a simple solution? Thanks.
To get it to scan id requires pushing and holding the scan button till you hear it beep then it should start reading id search accross the screen.. but do you have any ids to scan in there....oh and by the way you need to do all the above while the scaner is trunking.
Hi - You can download the manual from the link underlined in blue below:
Pro-95
Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!
121 views
Usually answered in minutes!
After further study -- he had not programed it at all, and not in the trunked mode (he had just entered random freqs in the TRSY.) One of these days I will program it.
×